Post pics of your house build

RETODD

Active VIP Member
Joined
Feb 20, 2008
Messages
7,317
Reaction score
210
Location
The business end of a Beer!
Website
www.valemountvacationrental.com
When were these pics takin? My buddy owns a concrete company and he's pouring my neighbors shop this morning and there was a green concord truck there with airbrushing but i can't remember seeing a demon on it. Do they have a few rigs?

They were taken in south central Edmonton yesterday 5pm'ish. Not too sure but by the sounds of it he is a one man show. Nice guy...treats his rig link gold.
 

Crazy8

Active VIP Member
Joined
Dec 8, 2008
Messages
465
Reaction score
326
Location
Beaumont
When were these pics takin? My buddy owns a concrete company and he's pouring my neighbors shop this morning and there was a green concord truck there with airbrushing but i can't remember seeing a demon on it. Do they have a few rigs?


His name is Art, just one pump. Best looking pump in this part of the world.
 

Showtime

Active VIP Member
Joined
Oct 23, 2007
Messages
2,334
Reaction score
326
Location
Spruce Grove, AB
They were taken in south central Edmonton yesterday 5pm'ish. Not too sure but by the sounds of it he is a one man show. Nice guy...treats his rig link gold.

I did see a skinnier build dude with a handle bar mustache and slightly longer hair i assume that's the owner as he was running the pump truck. My buddies sticker is on one of his boom supports. "Sparling Concrete"
 

RETODD

Active VIP Member
Joined
Feb 20, 2008
Messages
7,317
Reaction score
210
Location
The business end of a Beer!
Website
www.valemountvacationrental.com
Forms 3/4 up...rebar tied in today and forms completed...pour Monday :d

IMG00018-20100819-1808.jpg
 

Cyle

Active VIP Member
Joined
Jan 21, 2008
Messages
7,181
Reaction score
4,752
Location
edmonton
Looking good. But i'm still in shock at why everyone pumps footings now.....By the time the pump sets up you can have them poured right from the truck on most houses especially by the looks of it from all the people there! Jeeze you'd think it was the city or something :p

I cannot wait to start though! Finally got lot financing worked out. Just need to find a good lot and all set. Sure wish there was more out there :(
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
111,841
Reaction score
85,856
Location
beautiful, downtown Salmon Arm, BC
....... But i'm still in shock at why everyone pumps footings now.....(

Quite simple.....faster and cheaper in the long run. No wait time or extra charge for the truck, no clean up for the crew, and just one set-up for the pumper. The other neat thing they are using more and more is a "line pump".

Things have sure changed in the last 10 years since I built our house....

Now that the concrete is done it will be go, go, go ....keep the pictures coming!
 

2manykids

Active VIP Member
Joined
Oct 19, 2008
Messages
5,284
Reaction score
12
Location
Edmonton,AB
Yep a few year ago it was" Make it a bit wet this is a 50 foot run, still end up 15 feet short aand have to wheelbarrow the last bit , while the truck moves to the other side of the hole. A few hours today was a whole day back then
 

Uturn

Active VIP Member
Joined
Jan 30, 2008
Messages
2,540
Reaction score
360
Location
Ardrossan, AB
Rented a mini excavator yesterday and got the external sump pit in. Started on weeping tile on the lower part of the walkout. What a soupy mess!!

If the framers come today to frame the walkout and start floor joists, looks like it will be a day off for me!!!

Pics later.
 

Cyle

Active VIP Member
Joined
Jan 21, 2008
Messages
7,181
Reaction score
4,752
Location
edmonton
Quite simple.....faster and cheaper in the long run. No wait time or extra charge for the truck, no clean up for the crew, and just one set-up for the pumper. The other neat thing they are using more and more is a "line pump".

Things have sure changed in the last 10 years since I built our house....

Now that the concrete is done it will be go, go, go ....keep the pictures coming!

If access to the sides is extremly limited yes, but generally it's as fast and no mess. If your doing a few houses side by side I can see it, but otherwise it's a big cost. 3 guys and a pump just passing the cost on IMO. No reason for extra truck waiting time, most allow 8 mins/meter that is a lot of time. 3 guys can do a massive footing and be gone in 45 mins without a pump.

The reason everyone has gone to pumps is it's tough to find any good help. Done the same thing a lot of times, but it is getting insane what is pumped nowdays.
 

The Arborist

Active VIP Member
Joined
Mar 5, 2009
Messages
260
Reaction score
94
Location
Radium B.C.
Looking good. But i'm still in shock at why everyone pumps footings now.....By the time the pump sets up you can have them poured right from the truck on most houses especially by the looks of it from all the people there! Jeeze you'd think it was the city or something :p


There is no doubt that things have changed in the way concrete is poured, but in most cases there are factors that make a pump the logical choice. To get a mixer around a job site can be a major pain, most lots barely have room to store the excavated dirt for back filling, other development have strict rules on where you can access the site.
To wheel the concrete on a nice firm base is feasible, but by the look of some of these pics... :confused:

With that being said, I can remember pouring WALLS with the mixers backing up narrow steep ramps built out of loose fill.
Running the drum and shute height trying not to hook the wall all while creeping forward looking in the mirror filling the form while dude is hanging on the shute walking a 10' wall. Not the safest way to go. :nono:

That was a while ago, now I get the mud delivered to me, flat work only.
I run a very small crew (one guy that helps me place and my 77 year old dad) with "over fifty years experience" his quote.
Most contractors supply wheelers, but in the last couple of years we have used a line pump more and more. It has a lot to do with radiant slabs being more popular, as line pumping puts a lot less stress on the heating pipes then wheeling on plywood. Also we have been doing a lot more second and third story 2" slabs for radiant heat and the line pump is the only way to go.

Hey Ferniesnow, the line pump I use is Zip pumping out of Cranbrook. Todd is a great guy to have on site, I'm sure that he services your area aswell.

I would love to know what the going rate for slabs are in different areas.
I'm staying busy here, but a road trip could be good.:spot:
 
Last edited by a moderator:

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
111,841
Reaction score
85,856
Location
beautiful, downtown Salmon Arm, BC
There is no doubt that things have changed in the way concrete is poured, but in most cases there are factors that make a pump the logical choice. To get a mixer around a job site can be a major pain, most lots barely have room to store the excavated dirt for back filling, other development have strict rules on where you can access the site.
To wheel the concrete on a nice firm base is feasible, but by the look of some of these pics... :confused:

With that being said, I can remember pouring WALLS with the mixers backing up narrow steep ramps built out of loose fill.
Running the drum and shute height trying not to hook the wall all while creeping forward looking in the mirror filling the form while dude is hanging on the shute walking a 10' wall. Not the safest way to go. :nono:

That was a while ago, now I get the mud delivered to me, flat work only.
I run a very small crew (one guy that helps me place and my 77 year old dad) with "over fifty years experience" his quote.
Most contractors supply wheelers, but in the last couple of years we have used a line pump more and more. It has a lot to do with radiant slabs being more popular, as line pumping puts a lot less stress on the heating pipes then wheeling on plywood. Also we have been doing a lot more second and third story 2" slabs for radiant heat and the line pump is the only way to go.

Hey Ferniesnow, the line pump I use is Zip pumping out of Cranbrook. Todd is a great guy to have on site, I'm sure that he services your area aswell.

I would love to know what the going rate for slabs are in different areas.
I'm staying busy here, but a road trip could be good.:spot:

Have used Todd also; great guy. Poured a garage slab in a backyard and couldn't get the concrete truck off the street (driveway was iffy for the weight), and because of overhead wires couldn't use Garrett's pump truck. All things considered (labour for wheelers, labour/material for ramps and run-ways, clean-up, etc) the line pump was cheaper even with the mileage from Cranbrook.

And you are correct with regards to the in-floor heating; don't want to puncture one of those tubes!!
 

Cyle

Active VIP Member
Joined
Jan 21, 2008
Messages
7,181
Reaction score
4,752
Location
edmonton
Have used Todd also; great guy. Poured a garage slab in a backyard and couldn't get the concrete truck off the street (driveway was iffy for the weight), and because of overhead wires couldn't use Garrett's pump truck. All things considered (labour for wheelers, labour/material for ramps and run-ways, clean-up, etc) the line pump was cheaper even with the mileage from Cranbrook.

And you are correct with regards to the in-floor heating; don't want to puncture one of those tubes!!

O ya I agree with you there, pump a lot of stuff now. Even pump regular driveways some, just because of pure size. But a footing seems different to me, dunno why. The last one I did was 8 meters and 3 of us had it completely finished and gone in like 45 mins, didn't even consider a pump.

Plumbers say you can wheel directly on the lines, but I still won't do it. Always so worried about it.
 
Last edited:

Uturn

Active VIP Member
Joined
Jan 30, 2008
Messages
2,540
Reaction score
360
Location
Ardrossan, AB
Framers are working on the walkout walls today.

Here is some pics from the weekend.

Friday. Rented mini excavator and put in external sump and added gravel to some weeping tile.
Aug-20-Mini-Hoe.jpg


Waterproofing the basement walls
Aug-22-waterproofing.jpg
 
Top Bottom