Lets see your enclosed

[cattechsummitrider]

Its a bit messy
Installing drawers in the cabinets

 

[NoBrakes!]

Nice work!

 

[MP Kid]

Wow.. the in-floor is super nice, but that’s a lot of connections. Can’t imagine the leaks after 5-10 yrs of use.

I do like the fact that you used a router to “bury” the lines. Been think of a system like this for years. If you installed the lines under the sheeting, then spray foamed the bottom, do you think the heat would be the same?

 

[cattechsummitrider]

I think the heat would be close,, But if i did it under the sheeting ( would still router them in ) i would use 5/16 line and it would give a little more even heat ( you can feel a bit of difference with bare feet ) And I originally went with 2 inches of spray foam then went to 4 inches and there was quite a difference, The system is 5 years old this year and the only leak was from hose clamps needing retightening , used a really soft copper because it's expansion rate was very low and its longevity in industrial applications was really good

 

[cattechsummitrider]

And you could also have something like nudo flooring on top that lasts very well and carbides don't cut into

 

[arff]

Ouch you paid good for that one, Ron bought the same one when I bought mine, his I think was 269.00, mine was 229.00 although mines a bit different.

I paid 266.00

 

[MP Kid]

Does anyone in the Calgary area have one of these Chinese knockoff air heaters mounted in their trailer? I’d like to see one in action (especially right now when it’s damn cold outside)

 

[arff]

Just tested mine in garage.
30 mph wind speed from heater
air was 60 C

This was tested 1 inch from outlet

It will heat my enclosed no problem

 

[rknight111]

//uploads.tapatalk-cdn.com/20210206/9471ad57e98e162bd9dbbe2671e681dc.jpg

Will install in a week or so

I got it at home and can sell it. I can get one In the summer

 

[snoflake]

Pimped out Featherlite with Polished Stainless cabinets. All exterior Aluminum has been recently polished as well. This one is for sale for $40g. should have the ad up later this week with more info. PM me if someone is looking for a sweet car/sled trailer **SOLD**

 

[Trukker]

Pimped out Featherlite with Polished Stainless cabinets. All exterior Aluminum has been recently polished as well. This one is for sale for $40g. should have the ad up later this week with more info. PM me if someone is looking for a sweet car/sled trailer
View attachment 232497
View attachment 232498
View attachment 232499
View attachment 232501

Sweet trailer Snowflake . Looks like you spent sometime polishing it .......................

 

[snoflake]

Its Snoflake without the W mmmkay!

 

[HoldMyBeerAndWatchThis]

TTT, its that time of the year again!

 

[Legend14]

Brooms... I need an indestructible push broom that you can chip a little ice with and it doesn’t explode in your hands...

and a good way to wall mount it!

Sounds like you need railroad track broom

 

[gotboost]

My new TrailWest RPM enclosed sled trailer full heat with heated floor and lots of cabinets. My white 46 foot enclosed race trailer and my 20 foot race trailer

 

[papajake]

I see you bought it from Airdrie Trailer I must of hooked it up for you is everything working for you we can't keep then in stock just sold our last 28 foot goose neck

 

[gotboost]

I see you bought it from Airdrie Trailer I must of hooked it up for you is everything working for you we can't keep then in stock just sold our last 28 foot goose neck

Everything is good Parts guy well that's a different story

 

[AkNomad]

We sold the Cargo Mate about 7-8 years ago and bought an all aluminum 2020 Snow Pro 20x8.5 with a 45k propane furnace, led lighting, corner cabinet with a battery and a converter that I installed, hanger rack, and spare tire. The floor has some kind of coating on it that protects it from getting torn up by our sleds. 1 man door, 2 windows, roof vent and 2 fuel doors.

 

[Chrisco]

Just finished mine up.

 

[HoldMyBeerAndWatchThis]

Looks very nice, supper clean. Is that carpet under the hangers? what ever it is, great idea, I hate the marks from the swinging packs and gear.