Lets see your enclosed
- Thread starter HoldMyBeerAndWatchThis
- Start date
Dawizman
Active VIP Member
Seems to work just fine. I left it on high overnight and there were no issues with it. ABS actually has a higher heat resistance than PVC.
thought I would add my trailer to this. Fits four, but need to back in the last 2. Started with just plywood on the walls. Took all that down and put in 1" rigid foam on walls and ceiling. Cut a hole in the floor and installed a 2x4 rectangular tube aluminum with holes. 2 holes in the bottom side. This has proved to be excellent for draining. 2 round bars divert water flow into the drain. I think I've had water make it to the door once when the bottom holes plugged up. Then installed some FRP board. I wouldn't use that again. Probably try white aluminum sheets. Got the floor and ramp sprayed with line-x. Seems to hold up great to carbides. Installed 2 diesel heaters. Exhaust and intake go through the floor. The air it heats is just pulled from inside the trailer. Haven't had any issues with this set up. One feeds ducting along the roof and discharges in 3 locations. The second feeds the gear dryer, or can be duct can be flipped to blow into trailer. Have had the trailer in the mid 30s with both heaters going on med/high. I have a maxxair fan in roof to suck out moisture. No insulated floor yet. Built a stand for 2 200ah li-ion batteries, charger/inverter, diesel tanks, and the furnaces. Ordered a cabinet, works great for some parts and oil jugs. Aresol can rack holds some smaller tools, etc. DSW bar and hooks. Cup dispenser from Amazon for half price compared to Allan Dale. In the middle of building a helmet rack for top of gear dryer. Built the cabinet that houses the switches, stereo, and usb ports. Lights are. Amazon 12V puck lights. Super holders from a guy by red deer. Kustom sled connection? Shore power plug installed in v nose. Super track installed in correct spot so we can use superclamps. I hate having to strap down sleds in a trailer. still a few things to do to finish it up. Debating about selling it to start all over and do all this to a gooseneck.
Similar threads
