ippielb
Active VIP Member
- Joined
- Mar 4, 2011
- Messages
- 1,967
- Reaction score
- 3,605
- Location
- SE Saskatchewan
- Website
- www.youtube.com
Just noticing that quality work, and good business itself is almost non existent anymore? in the last month i have had the absolute WORST experience dealing with businesses and quality of work.
Sent exhaust to get coated, emailed with a picture that there is a crack in a location. Took two months to get back, and came back cracked, and a hole in the exhaust you can see through. They even list in the service they check the piece multiple times through out the process to ensure it doesn't create pin holes or anything. Took two months, even with me paying an extra $50 for the rush.
bought titanium hardware and pins to fit into clutch, one pin was not machined properly, was tight in the clutch figured that out when i was installing it, tried to remove, and galled into the aluminum of the clutch. Had to use liquid nitrogen to freeze the pin, and punch it out. One of the torx head bolts the torx was not put in properly and the torx bit cannot fit all the way to the bottom of the socket.
Was removing the clutch because the weights i was sent were the wrong weight, i thought they felt heavy good thing i asked.
Ordered frog skinz told them everything i needed over the phone. They didn't send me everything that i ordered, it took a month to get them, instead of shipping the new frog skinz express like i asked, they sent it snail mail again, and charged me for freight on top of it. Which sucks because its the same company that makes the titanium pins...
That's not even including the problems that arose from my own unfortunate terrible luck, anyone else notice that people just dont care anymore?
Sent exhaust to get coated, emailed with a picture that there is a crack in a location. Took two months to get back, and came back cracked, and a hole in the exhaust you can see through. They even list in the service they check the piece multiple times through out the process to ensure it doesn't create pin holes or anything. Took two months, even with me paying an extra $50 for the rush.
bought titanium hardware and pins to fit into clutch, one pin was not machined properly, was tight in the clutch figured that out when i was installing it, tried to remove, and galled into the aluminum of the clutch. Had to use liquid nitrogen to freeze the pin, and punch it out. One of the torx head bolts the torx was not put in properly and the torx bit cannot fit all the way to the bottom of the socket.
Was removing the clutch because the weights i was sent were the wrong weight, i thought they felt heavy good thing i asked.
Ordered frog skinz told them everything i needed over the phone. They didn't send me everything that i ordered, it took a month to get them, instead of shipping the new frog skinz express like i asked, they sent it snail mail again, and charged me for freight on top of it. Which sucks because its the same company that makes the titanium pins...
That's not even including the problems that arose from my own unfortunate terrible luck, anyone else notice that people just dont care anymore?