2018 Yamaha Sidewinder MTX 162 Build

Catman10

Drinking the Doolaid
Joined
Sep 30, 2008
Messages
801
Reaction score
2,382
Location
Red Deer Alberta
The SSI profile looks much better than my STM weights, I have noticed a little less bottom end pull with the STM weights as well, we will see I guess, they are also a pain in the ass to change on the hill, small screws etc whereas the SSI is a magnet. I need to get my machine to proper RPM as I have never had it do so the whole time I have owned it with the 174, got close, 8700 rpm but now I want it dialled and then gonna try some custom helix's, should hit 70 mph + when I am done I figure. The best part of the Sidewinder is that it is no slouch even though I am low on rpm and I just like to ride but I need to make time next trip so I can really get er hummin!
 

Xmrider163

Active VIP Member
Joined
Dec 20, 2013
Messages
377
Reaction score
1,016
Location
Beaumont
The SSI profile looks much better than my STM weights, I have noticed a little less bottom end pull with the STM weights as well, we will see I guess, they are also a pain in the ass to change on the hill, small screws etc whereas the SSI is a magnet. I need to get my machine to proper RPM as I have never had it do so the whole time I have owned it with the 174, got close, 8700 rpm but now I want it dialled and then gonna try some custom helix's, should hit 70 mph + when I am done I figure. The best part of the Sidewinder is that it is no slouch even though I am low on rpm and I just like to ride but I need to make time next trip so I can really get er hummin!



Yep getting the most out of that tune will nice to see and ride!

So you can add and remove magnets then with them attached to the sled easily? When is this tuning trip happening? I have a few more changes to do and check to do after said changes also.
 

Catman10

Drinking the Doolaid
Joined
Sep 30, 2008
Messages
801
Reaction score
2,382
Location
Red Deer Alberta
We are hopefully going next weekend (Feb 2nd) depending if the snow Gods bring some fluff to the hills for us to play in! We are also doing some wizzy clutching on the Alpha so that will be interesting, but that is secret info ha ha, I will let Dragonweld and Niner post about that if we get positive results.
 

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,221
Reaction score
4,102
Location
Red Deer County
Great build Xm rider 163, and good informative thread. What is the results on the clutching?
I am thinking about upgrading from my viper and purchasing a winder. Some pretty good deals around on 17's and 18's.
 

Xmrider163

Active VIP Member
Joined
Dec 20, 2013
Messages
377
Reaction score
1,016
Location
Beaumont
Great build Xm rider 163, and good informative thread. What is the results on the clutching?
I am thinking about upgrading from my viper and purchasing a winder. Some pretty good deals around on 17's and 18's.

Hey thanks, didn’t put many km’s on this season with this back injury and all but I did find a few setups I liked. I believe I ended up with 37 Yamaha helix, purple EPI spring 3-1 setting and QA70’s
 

old700

Active VIP Member
Joined
Nov 18, 2008
Messages
150
Reaction score
212
Location
Rimbey
Xmrider, I’m going to pull the trigger on the Evo stage 4 on my SW this year. Do you run 91 octane? And I also ride around home if snow lets me (2800’). Is that flash ok at lower altitude as well? Thanks.
 

Kibbels

Active VIP Member
Joined
Dec 11, 2008
Messages
1,239
Reaction score
3,190
Location
Central Alberta
Xmrider, I’m going to pull the trigger on the Evo stage 4 on my SW this year. Do you run 91 octane? And I also ride around home if snow lets me (2800’). Is that flash ok at lower altitude as well? Thanks.

I will give you some friendly advice or my opinion..... The Stage 4 from EVO (this is a PEFI Product as EVO no longer does sleds) is very expensive for what you get. The OEM turbo will not make any of these claims of HP at any elevation other than SL.... You can throw all the FI, exhaust (header) Pump, reflash you want and it will not perform at elevation. Even the claimed 270hp tunes from any of them either it be PEFI, Hurricane, MapTune, BMP, TD etc..... they may be 225 at best at say 6000-8000ft. This stock IHTA Turbo does not have the volumetric efficiency to increase such numbers beyond SL....

If in fact you're serious of doing this my advice would be do the MCX Stage 3.... you get the 19T coupled with matched injectors therefore actually getting acclaimed power as advertised without adding a header (that will probably crack), and whatever gizmos. Don't get me wrong PEFI builds and designs some very beautiful products....!

Goodluck.
 

old700

Active VIP Member
Joined
Nov 18, 2008
Messages
150
Reaction score
212
Location
Rimbey
I will give you some friendly advice or my opinion..... The Stage 4 from EVO (this is a PEFI Product as EVO no longer does sleds) is very expensive for what you get. The OEM turbo will not make any of these claims of HP at any elevation other than SL.... You can throw all the FI, exhaust (header) Pump, reflash you want and it will not perform at elevation. Even the claimed 270hp tunes from any of them either it be PEFI, Hurricane, MapTune, BMP, TD etc..... they may be 225 at best at say 6000-8000ft. This stock IHTA Turbo does not have the volumetric efficiency to increase such numbers beyond SL....

If in fact you're serious of doing this my advice would be do the MCX Stage 3.... you get the 19T coupled with matched injectors therefore actually getting acclaimed power as advertised without adding a header (that will probably crack), and whatever gizmos. Don't get me wrong PEFI builds and designs some very beautiful products....!

Goodluck.

Thanks. Ya I totally know the advertised hp numbers are grossly inflated, but without going huge, one of these flashes to get a bit more seems legit. Just like to know what I’m getting into because I don’t know anybody with a sled like this. Do enjoy going through all the posts though, lots of good.......and bad info. Lol
 

Xmrider163

Active VIP Member
Joined
Dec 20, 2013
Messages
377
Reaction score
1,016
Location
Beaumont
Thanks. Ya I totally know the advertised hp numbers are grossly inflated, but without going huge, one of these flashes to get a bit more seems legit. Just like to know what I’m getting into because I don’t know anybody with a sled like this. Do enjoy going through all the posts though, lots of good.......and bad info. Lol


Hey I don’t think you can go wrong with tossing an exhaust, intake, tune, and some clutching. Is it going to be 300hp........ no but it feels better then stock, sounds better. And gives you that little extra.

As for which tune as far as mountain experience seems to be more of a pick your poison approach based on what I seen with the tunes I’ve rode with. So find local support and availability and pricing then enjoy.

Stage 3 mcx is clearly the winner from what I’ve read and seen. Randy said it’s very powerful and pulls really hard. And this would be my choice doing it all over again $$$ for HP.
 

old700

Active VIP Member
Joined
Nov 18, 2008
Messages
150
Reaction score
212
Location
Rimbey
Hey I don’t think you can go wrong with tossing an exhaust, intake, tune, and some clutching. Is it going to be 300hp........ no but it feels better then stock, sounds better. And gives you that little extra.

As for which tune as far as mountain experience seems to be more of a pick your poison approach based on what I seen with the tunes I’ve rode with. So find local support and availability and pricing then enjoy.

Stage 3 mcx is clearly the winner from what I’ve read and seen. Randy said it’s very powerful and pulls really hard. And this would be my choice doing it all over again $$$ for HP.

Thanks, I ride this thing kinda like a 2 stroke so don’t want to convert it to a full blown climber. That mcx stage 3 does look fun at time though!
 
Top Bottom