jhurkot
Active VIP Member
How do you get the exhaust bog to go away on a 2018 mountain cat 800? Already sealed the intake.
You running a can? I've never had bogging issues on my 18 or 19
I haven’t had any bogging issues with my 19. But this is something that might help get more cold fresh air when the upper intake is plugged. The holes are protected by the plastic in front of it. So would be hard to puncture with a branch. My BDX bumper protects the holes better than the stock bumper also.
Jaws on both of mine. Too loud though lolStock can. What brand you using?
SSI y-pipe and SSI titanium can.Running stock can? Might have to try this.
Rode a buddies 850 doo yesterday and it was deep. Not one single bog ever, ran like a top. It was a 2018 though so I blew 2 belts.
I hate loud cans but if that's what it takes to get this to go away, I'll do it.
If you seriously blew two belts, I would take a bog over $400 a day in belts....Rode a buddies 850 doo yesterday and it was deep. Not one single bog ever, ran like a top. It was a 2018 though so I blew 2 belts.
I hate loud cans but if that's what it takes to get this to go away, I'll do it.
Double spring your exhaust/pipe.How do you get the exhaust bog to go away on a 2018 mountain cat 800? Already sealed the intake.
There is a program in CAT2 to cycle and check the operation of the exhaust valve servos, I'd check that too.Thanks guys, lots of good ideas to try here. My buddy used a friends can yesterday to test and still had the bog. Gonna try the stuff in this thread as well as an overly aggressive exhaust outlet deflector.