Search results

  1. B

    Phone Mount on Summit

    The mount is solid, the iphone is easy to read and use, but the phone durability can be an issue. Quad lock offers a vibration reducer but I haven’t bothered with it because I’ve only had trouble once in many years of use on different bikes and atv’s. I ruined one phone after lots of miles on...
  2. B

    Phone Mount on Summit

    I use quadlock on my bikes and finally got it set up on my sled.
  3. B

    3" track rubbing in deep whoops.

    I have seen people are even having trouble with the 165x3 expert where the track catches on the factory short/mini flap. Just watched a YouTube with a guy having to trim up the flap. https://youtu.be/0VBBBt_7QR0
  4. B

    Adjustable Limiter Strap

    It comes set up from factory 3/5. I’ve read guys saying to leave it here to keep the front end down. Adjusting it for 2/4 still gives the short setting one tighter than standard strap factory setting. Limit strap: Longest 1 Factory 3 Shortest 5 Adjustable strap comes 3 to 5 I also...
  5. B

    Bent A arms ??

    Yup, that all makes sense. I guess I would just add that going with the full Zbroz system addresses all that but is expensive. You can get their arms with their brass oilite bushings which are perfectly machined to take up all the side play as well, and can have them come with ball joints...
  6. B

    countdown till ucp has majority government in alberta

    They’re now saying if Sask doesn’t get our proposed plan approved by the elites in Ottawa that they will be collecting and reallocating it to low/no income earners, and probably a few identity groups of course. (...after their cut for gst and admin fees etc) I guess it is all about discouraging...
  7. B

    Bent A arms ??

    Did you end up bending the Zbroz?? Or what was it you didn’t like? I’ve got their complete front end, arms, spindles, bushings and shocks, and am loving it. To me it seems very well made and has taken some hits that scared me. Too expensive but...
  8. B

    The Truth Between Axys vs Doo 850 vs Doo 800

    Agree with all the comments so far, except I really don't find a narrow sled too much work ever. I do however ride dirt and mountain bikes a lot so maybe that helps?!? I have my Axys narrowed. It completely transforms it. Polaris has the dubious distinction of the widest mountain front end...
  9. B

    Battery drain

    Well that was an easy one, battery tested good, so I just cleaned up the post connections and put some dialectic grease on them and all is good!!! It had fooled me because of the partial crank it did before acting dead. I have most connections greased on this sled but guess I missed the obvious...
  10. B

    Looking for lower right a-arm

    I have new condition a arms off my '16, aluminum, with bushings and balls. I'm in Saskatoon. ****SOLD****
  11. B

    Battery drain

    Any ideas what could be causing a drain on my battery? Sled is e-start, standard guage so should have no draw while sitting... It ran great and battery was strong for week long trip, has sat in warm garage for a week since and battery is dead! With the key, turned over half a turn maybe, now...
  12. B

    Best GPS APP for Iphone w/ altitude

    For the iPhone, MotionX is a great app. I use it for all my tracking. You can run in airplane mode and your battery will last all day.
  13. B

    Axys Mods/ Improvements/ Add ons

    Cool, zbroz36 with the promotion... same setup I have done. Let us know how you like it. Are you running the stabilizer bar? I left it off but went with exit shocks. Haven't been out to try it yet!
  14. B

    Axys Mods/ Improvements/ Add ons

    Yeah, good idea, think I will vent the dash bag also. Looks like you used a flo-rite vent for the bag? Did you use a holesaw for the bag? And did you also screen the dash hole underneath the bag?
  15. B

    Broken Console with Knee

    Yup I put my knee through first time out. Was a relatively warm day as well, probably just freezing. My dealer did warranty mine, not sure if Polaris did it or the dealer. I think the material is just too stiff, my old XM had way more flex, and went through way harder hits!
  16. B

    01 mountain max 700 jetting

    Yup, I had a 2000 MM700 with aaen triples and reeds. I jetted it for 2200' at home, and then installed the Holzman tempaflow, which allowed manual adjustments for altitude. I would adjust the dial per my gps elevation readings. Rode with the same jets all the way up to 10,000' and it was the...
  17. B

    axis hand warmer plugs

  18. B

    axys front end anyone change controle arms or spindles ??

    It added up pretty quick but I am happy that it really changed the feel the way I hoped it would. It feels like a lighter, slimmer version of my XM now! The currency exchange really makes things expensive. The shipping and customs were not too bad because Zbroz use Fedex. I ordered the arms...
  19. B

    axys front end anyone change controle arms or spindles ??

    I had exactly the same experience. I really liked how my XM effortlessly carved back up hill. My Axys reminded me of my old XP. I put 36" arms on it at the end of my season, so I haven't tried it yet, but it is obviously improved. It is sitting 4"' narrower (39.25" to 35.25) with 1" more...
  20. B

    Where are you in Sask.? I'm in S'toon and have been considering the Silber kit for my Axys.

    Where are you in Sask.? I'm in S'toon and have been considering the Silber kit for my Axys.
Top Bottom