Xp 900 setup?

[hdkawi]

Just made deal for a xp 900 it all stock I want to run 30" mud tires thinking zillas what is the best setup? Will a clutch kit do or do I need to do a gear reduction I plan to do the reverse chain mod anyway. Will I need to add a lift kit?

 

[the_real_wild1]

Get the same tires I did. Get a clutch kit.

 

[hdkawi]

Oh it's a 2011 does it have a plastic front dif ?
What tires u running kieth how heavy r they ?
I thinking the might b a little short on power

 

[the_real_wild1]

The sprag is plastic. I got the outback max tires. 900 will turn them just fine

 

[hdkawi]

I thought they started out with plastic spags in the 800 then went to aluminium
Then went back to plastic in 2015

 

[tripster]

My 11 800 came with alum sprag stock the 10's still had plastic

 

[arff]

I run 30 inch tires. Run a clutch kit. It made a big difference on bottom end take off. Just pin it

 

[arff]

Rubber down customs lift kit is a little over 2 inches.

I removed my rear sway bar and ran drop limiter to save axles from coming apart on jumps .
Snorkel it
Arched A arms
4 point harness
Led light bar

 

[hdkawi]

I run 30 inch tires. Run a clutch kit. It made a big difference on bottom end take off. Just pin it

what kind of 30" tires? do they rub ? and whats a drop down limiter

 

[the_real_wild1]

Just a strap limiter.

 

[hdkawi]

Like on the skid of a sled

 

[the_real_wild1]

Same idea

 

[arff]

what kind of 30" tires? do they rub ? and whats a drop down limiter

Do front fender mod.


Also move winch up like the hi lifter. Way cleaner location. Yes limiter strap.

 

[arff]

Mud tires last me 1 year.

Soft rubber and on off throttle. Sometimes I spin a bit.

 

[neilsleder]

I thought they started out with plastic spags in the 800 then went to aluminium
Then went back to plastic in 2015

My 500 ranger had a plastic bearing in it. So I made an aluminum housing with a heavy roller bearing. I don't got pictures right now but it worked good


Sent from my iPhone using Tapatalk

 

[neilsleder]

Found pictures of pictures lol


Sent from my iPhone using Tapatalk

 

[the_real_wild1]

What the **** is that? Is that in the from diff? Do you have a better pic of where it goes? I wonder if it would show well in the parts catalog? Looks cheap.

 

[neilsleder]

What the **** is that? Is that in the from diff? Do you have a better pic of where it goes? I wonder if it would show well in the parts catalog? Looks cheap.

My part or the stock plastic part looks cheap? Yah that's the front diff pinion shaft.


Sent from my iPhone using Tapatalk

 

[the_real_wild1]

LOL no your part looks good. I am surprised by the stock part.

 

[neilsleder]

If you look close the bearing is in there to! Weird there's issues with it lol.


Sent from my iPhone using Tapatalk