Unused connectors in the harness?? ...my mind is blank

NotoriousNRB

Active VIP Member
Joined
Sep 21, 2010
Messages
164
Reaction score
17
Location
Calgary SW
its been far too long since i pulled this machine apart (approx 1.56yrs) and i can't figure out where these connectors go!! AM I BLIND?! :confused:

the first one pictured here is a 3 prong female plug under the instrument cluster... wire colors are wht/red, red/blk, blk.

8D3FB9B1-E807-4EC7-8DD0-46C5EE457B46-554-000000366C83F73F_zps9865ea7c.jpg

7417385E-8BF2-4D36-B56A-8F82AF35C8E1-554-0000003656E83F33_zpse8624553.jpg



AND this one here is a 2 prong located above the carbs with one black wire and one red/yellow

C7AD3AB5-B7B9-4565-A3BF-24BD5FFFA750-554-00000036622F2E55_zpsf4de9010.jpg


i don't want to start it up without knowing where these go. any help is greatly appreciated.
 

POWDERSLUT

Active VIP Member
Joined
Feb 15, 2008
Messages
2,152
Reaction score
1,308
Location
Da Loops
neither are hooked up on my xp,,and she runs fine..must be for other acc..
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,553
Reaction score
16,987
Location
DA Moose B.C
The big one behind the cluster is for the extra module for temp ect on the cluster.


The other plug 2 wires is the accessery plug in for like a lead dog , GPS , ect.

from my HTC
 

team-x

Active VIP Member
Joined
Sep 4, 2012
Messages
228
Reaction score
129
Location
Edmonton
X2, they can both be unplugged with no problems, I cut the small one for my lead dog and the other is for the temp guage and compass functions. While they are apart I would throw some dielectric grease on there just so you don't have any issues with condensation shorting things out.
 
Top Bottom