Track speed vs ground speed or mpi viper 162 vs summit t3 174

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
29,394
Reaction score
48,070
Location
GBCA
Thanks Roy.I just spit coffee out my nose.
The real issue here is which one processes snow better. We need to see the numbers on both and Russ is the only one on this forum I trust to complete those calculations correctly so will have to wait until we hear from him on this matter before rendering an opinion. LOL
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
Thanks Roy.I just spit coffee out my nose.


did the coffee leave a trench in your snot? then we could figure out the rate of speed of the coffee leaving your nose
 

rusty

GBCA Member
Joined
Nov 25, 2007
Messages
2,857
Reaction score
582
Location
in my garage
The real issue here is which one processes snow better. We need to see the numbers on both and Russ is the only one on this forum I trust to complete those calculations correctly so will have to wait until we hear from him on this matter before rendering an opinion. LOL

Tonight I will calculate centripetal force required vs the available.


Sent from my iPhone using Tapatalk
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
29,394
Reaction score
48,070
Location
GBCA
Tonight I will calculate centripetal force required vs the available.


Sent from my iPhone using Tapatalk
sheldon-whiteboard.jpg
 

Modman

Active VIP Member
Joined
Mar 13, 2008
Messages
6,032
Reaction score
8,455
Location
Castlegar
That's really not important in a situation like I'm speaking of. Your forgetting you now have to accelerate a heavier object with less traction up an incline from a stop in powder snow. Your viper will be trenched up to the headlights. I'm not saying torque and power are not extremely important but it doesn't fully compensate for weight and traction when we are talking about 180hp kits. Throw a 174x3 on a 200+Hp Yamaha and likely game over for the skidoo


Sent from my iPhone using Tapatalk -

Actually, its exactly what we're talking about. You're trying to hang your hat on the perceived "weight" advantage that doesn't exist since the NA sled loses HP.

500 lb Doo with 140 HP at 5000': 3.57 lbs/HP
650 lb Yammy with 180 HP at 5000': 3.61 lbs/HP

I whipped up this spreadsheet so you can see what the P:W is with the 3% loss is at elevation.

Elevation (in thousands)
HP
Loss
Corrected HP
Power to Weight Ratio
163
163
3.067484663
1
163
4.89
158.11
3.162355322
2
158.11
4.7433
153.3667
3.260160126
3
153.3667
4.601001
148.765699
3.360989821
4
148.765699
4.46297097
144.302728
3.464937959
5
144.302728
4.329081841
139.9736462
3.572100989
6
139.9736462
4.199209386
135.7744368
3.682578339
7
135.7744368
4.073233104
131.7012037
3.796472515
8
131.7012037
3.951036111
127.7501676
3.91388919
9
127.7501676
3.832505028
123.9176626
4.03493731
10
123.9176626
3.717529877
120.2001327
4.159729185

The physics of it suggests that at 5,000', the Doo does not have any "accerelation" advantage since its pushing the same mass to power ratio. Only difference would be traction. In the tight tight trees...going uphill...from a dead stop...I get what you're saying, but the reality is there is a compromise in a sleds ability, trading in 100% of a sleds ability for track speed in most situations, to gain a very slight advantage(with respect to floatation) for riding in the tight tight trees 10% of the time is only going to be appealing to 0.1% of the riders out there. Otherwise, the 180 kit is much more fun for everything else that you encounter on the hill. Just my opinion.
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
29,394
Reaction score
48,070
Location
GBCA
Look Sheldon!!!A spread sheet!Are these numbers already on your whiteboard?
Actually, its exactly what we're talking about. You're trying to hang your hat on the perceived "weight" advantage that doesn't exist since the NA sled loses HP.

500 lb Doo with 140 HP at 5000': 3.57 lbs/HP
650 lb Yammy with 180 HP at 5000': 3.61 lbs/HP

I whipped up this spreadsheet so you can see what the P:W is with the 3% loss is at elevation.

Elevation (in thousands)HPLossCorrected HPPower to Weight Ratio
1631633.067484663
11634.89158.113.162355322
2158.114.7433153.36673.260160126
3153.36674.601001148.7656993.360989821
4148.7656994.46297097144.3027283.464937959
5144.3027284.329081841139.97364623.572100989
6139.97364624.199209386135.77443683.682578339
7135.77443684.073233104131.70120373.796472515
8131.70120373.951036111127.75016763.91388919
9127.75016763.832505028123.91766264.03493731
10123.91766263.717529877120.20013274.159729185

The physics of it suggests that at 5,000', the Doo does not have any "accerelation" advantage since its pushing the same mass to power ratio. Only difference would be traction. In the tight tight trees...going uphill...from a dead stop...I get what you're saying, but the reality is there is a compromise in a sleds ability, trading in 100% of a sleds ability for track speed in most situations, to gain a very slight advantage(with respect to floatation) for riding in the tight tight trees 10% of the time is only going to be appealing to 0.1% of the riders out there. Otherwise, the 180 kit is much more fun for everything else that you encounter on the hill. Just my opinion.
 

rusty

GBCA Member
Joined
Nov 25, 2007
Messages
2,857
Reaction score
582
Location
in my garage
Your confusions (conclusions) are only valid at the end of the crank. And does not include the moment of intertia that would be different on both sleds. Redo calculations with pounds per square inch of weight vs hp and your getting a bit larger picture. Also with the cvt system the infinite gearing can be ignored in calculation. And as for the volume of air controlled at altitude by the waste gate..... It's by pressure not O2. Even on a air to air system losses are still seen due to elevation.
Although o2 is involved in the calculation boost pressure is the deciding factor on the delta p of the fuel rail.

Sent from my iPhone using Tapatalk
 

b_doornenbal

Active VIP Member
Joined
Jul 1, 2008
Messages
254
Reaction score
314
Location
Spruce Grove
Not sure where you find a 500 lb doo ready to ride.... i think you starting weight numbers are a bit off
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,603
Reaction score
18,816
Location
Edson,Alberta
This thread is about track speed vs ground speed. Just reading reviews on the T3 and having no actual seat time on it like I do with the viper, the T3 should have less ground speed and less track speed than the viper.
There was no comparison on the same hill or in the trees between my 800 163 and the viper. The viper had instant throttle response and build both track speed and ground speed faster than my XM. Which made it for a fun sled to ride, yes it was heavy but having instant throttle response made the sled feel lighter.
I have rode with 1100t in deep snow and they do really well getting around, the owners fatigue quicker because of the weight and power they have to control, but it's the same chassis. The stock 15 1100t I rode after the viper did feel different, even tho the power is almost the same between the two. The viper felt stronger and smoother due to IMO a better engine and better clutching.
Like I said before I'm not a 4 stroke guy but the viper impressed.


Sent from my iPhone using Tapatalk
 

Modman

Active VIP Member
Joined
Mar 13, 2008
Messages
6,032
Reaction score
8,455
Location
Castlegar
Your confusions (conclusions) are only valid at the end of the crank. And does not include the moment of intertia that would be different on both sleds. Redo calculations with pounds per square inch of weight vs hp and your getting a bit larger picture. Also with the cvt system the infinite gearing can be ignored in calculation. And as for the volume of air controlled at altitude by the waste gate..... It's by pressure not O2. Even on a air to air system losses are still seen due to elevation.
Although o2 is involved in the calculation boost pressure is the deciding factor on the delta p of the fuel rail.

Sent from my iPhone using Tapatalk

Without getting too technical, shouldn't we be using the actual torque values and not fabricated HP numbers if you want to calc it correctly. :) Point wasn't to give an engineering degree, was just to show that the power to weight wasn't that much when you factor in boost.

Not sure where you find a 500 lb doo ready to ride.... i think you starting weight numbers are a bit off

Not sure where I'd find a stock one with 163 HP at the Allen Creek parking lot either......haha - yes the starting numbers are off. I know. Point was to show the BEST case scenario for the NA sled and it still averages at elevation.

Someone please tell me that I didn't factor in rider ability either. LOL
 

HANDSOME

Member
Joined
Oct 31, 2012
Messages
17
Reaction score
10
Location
POUCE COUPE BC
This thread is about track speed vs ground speed. Just reading reviews on the T3 and having no actual seat time on it like I do with the viper, the T3 should have less ground speed and less track speed than the viper.
There was no comparison on the same hill or in the trees between my 800 163 and the viper. The viper had instant throttle response and build both track speed and ground speed faster than my XM. Which made it for a fun sled to ride, yes it was heavy but having instant throttle response made the sled feel lighter.
I have rode with 1100t in deep snow and they do really well getting around, the owners fatigue quicker because of the weight and power they have to control, but it's the same chassis. The stock 15 1100t I rode after the viper did feel different, even tho the power is almost the same between the two. The viper felt stronger and smoother due to IMO a better engine and better clutching.
Like I said before I'm not a 4 stroke guy but the viper impressed.


Sent from my iPhone using Tapatalk
I went from a yamaha turbo to a xm 163 stock. I now want to sell the xm and go to a viper.
 

bigfish

Active VIP Member
Joined
Jan 12, 2010
Messages
375
Reaction score
794
Location
kitimat b.c
Yeah that's BS, its still too front heavy, I havent ridden a viper yet but I highly doubt this. If it was the case, every manufacturer would have a four stroke contender.

you know its too front heavy but you havnt ridden it?:rolleyes: i dont get it:confused:
 

OOC ZigZag

Active VIP Member
Joined
May 12, 2010
Messages
1,581
Reaction score
1,385
Location
Calgary
Apples apples oranges oranges the T3 174 boosted will eat the yammi boosted competitionhe stock T3 will kill a stock 4 stroke Yammi. Soooo If the 4 strokes turboed and the Doos stock the turbo will chew the Doo.JMHO
Cheers
 

bigfish

Active VIP Member
Joined
Jan 12, 2010
Messages
375
Reaction score
794
Location
kitimat b.c
Apples apples oranges oranges the T3 174 boosted will eat the yammi boosted competitionhe stock T3 will kill a stock 4 stroke Yammi. Soooo If the 4 strokes turboed and the Doos stock the turbo will chew the Doo.JMHO
Cheers

you can get the yammi stock with the turbo & warranty,its no diff than getting the t3 174 snow check option:confused:but if it makes you guys feel better to say it will kick the unboosted viper no prob it will,but how many do you think will have one without the turbo.:cool::beer:
 

OOC ZigZag

Active VIP Member
Joined
May 12, 2010
Messages
1,581
Reaction score
1,385
Location
Calgary
you can get the yammi stock with the turbo & warranty,its no diff than getting the t3 174 snow check option:confused:but if it makes you guys feel better to say it will kick the unboosted viper no prob it will,but how many do you think will have one without the turbo.:cool::beer:

Ok so you can order a Yammi with a turbo point was a stock T3 will chew a stock 4 stroke and a boosted T3 will bury a boosted 4 stroke. The price diif for the 4 stroke with the turbo kit what 20 + K. T3 174 for aroumd 15 k. Alot more bang for your buck with the T3 JMO though lol.
 

bigfish

Active VIP Member
Joined
Jan 12, 2010
Messages
375
Reaction score
794
Location
kitimat b.c
Ok so you can order a Yammi with a turbo point was a stock T3 will chew a stock 4 stroke and a boosted T3 will bury a boosted 4 stroke. The price diif for the 4 stroke with the turbo kit what 20 + K. T3 174 for aroumd 15 k. Alot more bang for your buck with the T3 JMO though lol.

um no the viper with turbo kit is 16-18000$ the t3 doo is 17500$,& if you have been around any good set up turbo sleds the 4 will chew the 2 most of the time,in the trees the 2 will be easier to ride.they each have there place & both will put a smile on your face,we are lucky to have the sleds we have now they are better than most 25000$ mod sleds from 10years ago.
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
108,799
Reaction score
105,748
Location
Milo,Alberta
um no the viper with turbo kit is 16-18000$ the t3 doo is 17500$,& if you have been around any good set up turbo sleds the 4 will chew the 2 most of the time,in the trees the 2 will be easier to ride.they each have there place & both will put a smile on your face,we are lucky to have the sleds we have now they are better than most 25000$ mod sleds from 10years ago.
I'm not interested in delving into the whole which sled is faster argument but $17500 for a T3 174? Cmon?
 

Modman

Active VIP Member
Joined
Mar 13, 2008
Messages
6,032
Reaction score
8,455
Location
Castlegar
um no the viper with turbo kit is 16-18000$ the t3 doo is 17500$,& if you have been around any good set up turbo sleds the 4 will chew the 2 most of the time,in the trees the 2 will be easier to ride.

Exactly. Anyone who's ACTUALLY ridden with a decent 4 stroke can prove the whole "4 strokes can't keep up" statement wrong in a matter of minutes. I think too many of these guys are bowing down to the T3 like its the new Jesus. Its not even in the showroom and already its "murdering" boosted sleds....LOL
 
Top Bottom