Super Sidewinder 2018

[Lund]

Would you be able to make another for an mtx for a price. You know, down the road.....

Did you buy one of these things?

 

[Lund]

Well the track showed up. I guess the next big thing is to cut it down. Maybe this weekend, given the time.

 

[LBZ]

Did you buy one of these things?

Almost bought a BTX in Winnipeg to do a similar build last month.
Decided to quit my job and move back to BC instead so just finishing that up and will see where the summer takes me.
I'll either be on an SW or an almost new 2014 Summit that I can pick up for dirt cheap. Gotta upgrade the camper, and buy a couple atv's yet this year too so a new turbo sled may not be in the cards for another year.

 

[Catrider16]

Nice build on that snowmobile of your like always, looking forward to getting out with you again Boots.....LOL... Lund.
You need to call Cowboy, he has been trying to get a hold of you about the reunion, you know Markus did another tour, it wasn't good call me.
Hey, you need to get off these sites buddy there is nothing for you here other abuse.

 

[Xmrider163]

How's this project going? Put on hold for the track still?


Sent from my iPhone using Tapatalk

 

[Lund]

How's this project going? Put on hold for the track still?


Sent from my iPhone using Tapatalk

The track has been cut to fit and is installed, the project is on hold till the fall where it will see rails, gearing changes, pipe and fresh air intake, O2 sensor and gauge, gas can carrier and tunnel bag, tether installation.
On the other list to do will possibly be taller bars and rear scissor lock.

 

[Andrew.renegade1000]

So I'm patiently waiting to see your progress!

 

[Lund]

Well it arrived yesterday afternoon, at my door. Now the fun begins.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0007_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0009_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0010_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0012_1.jpg

Trying to restore my pictures of the build. Please be patient, its going to take me a while, probably couple day's cause busy with other things.
Once done i will post newest pictures of the build. THX.

 

[Lund]

So i found a little time today and got started. The tear down.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0022_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0023_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0024_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0025_1.jpg

 

[Lund]

OK not funny guys, who is the meathead that stole my tunnel???
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0030.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0028.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0027_1.jpg

 

[Lund]

Here is a quick reference of the difference between a 153 and a 174 tunnel caps.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0031.jpg

 

[Lund]

Well its official, this might be the first 174 SW. The tunnel is officially 174" as of today.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0033_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0034_1.jpg

 

[Lund]

Well here is something that i think the 2018 should have had.
These will be replacing the crappy (IMO) Cat boards. While Yamaha is adapting to Cats narrow boards for 2018, i'm going wider with Extreme CR boards. LOL
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0040_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0041_1.jpg

 

[Lund]

So i managed to get in a couple of hours into the project this afternoon;
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0042_1.jpg
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0043.jpg

 

[Lund]

I almost didn't take these pics, kinda forgot. I started to rip apart the other side and realized i wanted to do a comparison for you guys. Crappy...Ooops i mean Cat boards vs CR boards.
You can see where i started to pull the rear step, then stopped Ooops better take some pics.
Left side is done;
http://i46.photobucket.com/albums/f107/mikeslund/IMG_0775.jpg
http://i46.photobucket.com/albums/f107/mikeslund/IMG_0774.jpg
http://i46.photobucket.com/albums/f107/mikeslund/IMG_0772.jpg

 

[HotShotHarry]

Looking great there Mike. Hoping your operation went well and you get some seat time on that thing this season.

 

[Lund]

Looking great there Mike. Hoping your operation went well and you get some seat time on that thing this season.

Thank's
I had the surgery almost 2 months ago and should be going back to work next week.
Yes i'm looking forward to riding this thing, it is pretty much done. Only one thing to do and that is install my MC-express power up kit.
No stock yet and won't see it till January.
I will finish recovering the pictures and then post new pictures and current pictures of the build.

 

[Lund]

Ooops sorry about the side ways picture LOL.
Maybe this is better.
http://i46.photobucket.com/albums/f107/mikeslund/IMG_0781.jpg

 

[Lund]

So got the Cooler completed for those following this build;

The first picture shows installed of new Super Sidewinder cooler.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0060.jpg

This second picture shows the difference between a BTX cooler on far left, MTX cooler in center(cardboard cut out of exact dimensions) and far right is the Super Sidewinder cooler. These are tunnel coolers that work in conjunction with the bulkhead cooler.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0066_1.jpg

The third picture i'm just showing the profile of the new cooler. 1/2" vs 1", this allows for better track clearance and snow removal.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0067_1.jpg

Last picture shows the OEM cooler vs the new super cooler in cooling surface improvement.
http://i46.photobucket.com/albums/f107/mikeslund/DSC_0064.jpg

These pic's are not in order.

 

[Lund]

Well the track showed up. I guess the next big thing is to cut it down. Maybe this weekend, given the time.

http://i46.photobucket.com/albums/f107/mikeslund/DSC_0070.jpg