STACKS on trucks!

youngpolarisguy

Active VIP Member
Joined
Sep 18, 2007
Messages
1,075
Reaction score
448
Location
Wabamun
The only two reasons you should have stacks is one your driving a tractor or a rig and 2 its a race truck, thats it. If you spend lots of time at the track than i will admit you should have a stack just so the smoke clears when your spooling up kinda a safty thing.

On a short box truck there cant be that much more pipe when you run it out the side that it would cause a perfomace loss on boosted dsl. Why waste that much needed box space just so that you can think you look cool in your rig rocket.
 

summit889

Active VIP Member
Joined
Dec 10, 2006
Messages
931
Reaction score
678
Location
gibbons
only benefit is a bit less weight due to less exhaust parts. no performance advantage. sled pullers and drag racers run them because track officials ask us to so the smoke goes up and not at the starter or in the case of pullers at the sled operator.
 

lbartels

Active VIP Member
Joined
Jul 22, 2010
Messages
274
Reaction score
95
Location
Edmonton
I have no idea about potential power gains from stacks. But I do know I wont be putting any on my ranger. As far as there looks. Just chrome and straight, with maybe a 45 degree dog ear slashed. That's nothing to really look at. A tractor flap on the top might make people understand and not take a person so serious (similar to "trucknutz"). Maybe if some one had some cool perforated heat sheilds like a real big rig has it might look cooler. But when the hole in the box isn't cut nice it looks like junk. Also if they don't have a solid bracket holding it back from wagging like a dogs tail, they also look like junk. just my .02
 

KVF 700

Active VIP Member
Joined
Mar 6, 2009
Messages
883
Reaction score
105
Location
Woking
Not a truck, but as far as the dyno thing goes, switching from a 4" stack to a 6" stack gave 5 extra hp at the pto when we had the dyno on the 371 Detroit.
 

Attachments

  • ImageUploadedByTapatalk1316821305.768432.jpg
    ImageUploadedByTapatalk1316821305.768432.jpg
    54.5 KB · Views: 195

pipes

Active VIP Member
Joined
Dec 23, 2008
Messages
27,110
Reaction score
38,010
Location
Bonnyville Alberta
Not a truck, but as far as the dyno thing goes, switching from a 4" stack to a 6" stack gave 5 extra hp at the pto when we had the dyno on the 371 Detroit.


I saw that 99 at the truck and tractor pulls in Bonnyville las Sunday.
 

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
Stacks in my PU truck....rollen coal.....bla bla.... white sun glasses....rollen coal...stacks they make HP.....coal rollen.....I wish I had a life...oh ya Rollen coal!
Smoke is my life! It makes me cool.
If I only had a monster sticker!
 

teeroy

Active VIP Member
Joined
Oct 7, 2007
Messages
9,154
Reaction score
14,448
Location
Roma, Alberta
If it's not beneficial towards performance, then why the phuk do all sled pull trucks, drag trucks, etc. Run stacks?

Shorter route, thicker pipe, less back pressure.

only benefit is a bit less weight due to less exhaust parts. no performance advantage. sled pullers and drag racers run them because track officials ask us to so the smoke goes up, and not at the starter, or in the case of pullers at the sled operator.

thread over. any other reason than the aforementioned, you are a wannabe poser.
 

KVF 700

Active VIP Member
Joined
Mar 6, 2009
Messages
883
Reaction score
105
Location
Woking
I saw that 99 at the truck and tractor pulls in Bonnyville las Sunday.

Couldn't have been this one. She is sitting safe and sound in the shed. There are a few around, although they are rare.
 

Summiteer

Active VIP Member
Joined
Nov 8, 2006
Messages
5,883
Reaction score
3,508
Location
Whitecourt, Ab
Stacks on drag trucks, sled pull trucks, etc etc. Awesome, very useful.

Stacks on trucks that dont even roll coal, useless. Gay? No. But useless.

Stacks on a gas truck, gay.That's my point of view.



-Posted with my iPhone.
Stacks on street vehicle with less than with less than 8 wheels: Gay
Thats my point of view
 
Last edited:
Top Bottom