Sled deck on 1/2 ton?

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Excellent youtube video. Regurgitated the press release while adding the flair of an accent and Ford-produced B-roll footage. Bonus was the $25 giveaway, I really enjoyed that part.
No actual specs out yet, not much to work with.
 

takethebounce

Active VIP Member
Joined
Dec 10, 2008
Messages
5,193
Reaction score
8,750
Location
calgary
No actual specs out yet, not much to work with.

I always find these big blocks are around for a couple of years then the guys who have them are stuck with them because no one wants a used one.

Fords Triton V10, GM’s 8.1 even tied to the old Allison, just were not great performers and given the upgrade cost people were more inclined to go with a diesel.
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,360
Reaction score
68,819
Location
Local
had an 8.1 and loved it. had the v10 in a work Truck also but i wasn't a fan.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
I always find these big blocks are around for a couple of years then the guys who have them are stuck with them because no one wants a used one.

Fords Triton V10, GM’s 8.1 even tied to the old Allison, just were not great performers and given the upgrade cost people were more inclined to go with a diesel.
I think the difference this time is they are mated to a 10 speed transmission.
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
Yup.
Most people end up with a 1/2 ton and a sled deck cause they don't wanna take the big step up to a diesel.

This should really bridge that.

Their has been good options all along for gas powered 3/4 and one ton trucks .
This is just another .
I hate driving my one ton Duramax other then pulling . Real nice truck but sure isn’t like my 1/2 ton for 90% of my driving .
 
Last edited:

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Their has been good options all along for gas powered 3/4 and one ton trucks .
This is just another .
I hate driving my one ton Duramax other then pulling . Real nice truck but sure isn’t like my 1/2 ton for 90% of my driving .
Nah those were all mated to a six speed and were high reving rigs.

10 speed will make a big difference.

Imo
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
Nah those were all mated to a six speed and were high reving rigs.

10 speed will make a big difference.

Imo

Until we know the specs , most gas motors need to rev to make any power these days .
The 10 speed will be nice for sure .
I had a 6.2 3/4 ton Ford in 2010 and was great truck but needed 4:30 ratio if hauling anything or pulling .
 

doorfx

Active VIP Member
Joined
Jan 10, 2011
Messages
10,050
Reaction score
24,523
Location
calgary ab
548ac03188b9e01984b582ebd0c270ce.jpg
 
Top Bottom