Silbers 850 turbo kit could be the answer..

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
109,796
Reaction score
108,504
Location
Milo,Alberta
We have well over 200 G4's out now with 4 or 5 turboed and haven't had an issue with drivers yet? What are they doing to them or is this just another I heard it from a friend?
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,097
Reaction score
43,303
Location
Sherwood Park, Alberta, Canada
i run 10 lbs boost on my skidoo and never have an issue with drivers? and thats HCR as well as back country.

key is to not let them slip. once they do then they wear down fast and you are hooped. keep proper track tension which should be tighter than factory with boost in my opinion
 

Dannyturbo

Active VIP Member
Joined
Jan 5, 2013
Messages
314
Reaction score
594
Location
Valemount
I'd like to do drivers on my 850 just to get rid of the god awful noise and vibration when traveling downhill, avid's drivers corrects this problem apparently.
 

Popsiclestand

Active VIP Member
Joined
Aug 21, 2009
Messages
485
Reaction score
214
Location
Edmonton AB
I'd like to do drivers on my 850 just to get rid of the god awful noise and vibration when traveling downhill, avid's drivers corrects this problem apparently.

Powderfreaks drivers are far better than an avid in regards to vibration and noise. A little cheaper as well.
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
We have well over 200 G4's out now with 4 or 5 turboed and haven't had an issue with drivers yet? What are they doing to them or is this just another I heard it from a friend?

Hasn't happened to me personally yet. But if you feel like you dont believe me you can ask mr Rene st onge, hes cooked more then a few. Im not a fan of walking 2 days out of some deep dark hole for help so i just put stronger ones in and call it a day.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,358
Reaction score
12,967
Location
Edmonton
Hasn't happened to me personally yet. But if you feel like you dont believe me you can ask mr Rene st onge, hes cooked more then a few. Im not a fan of walking 2 days out of some deep dark hole for help so i just put stronger ones in and call it a day.

We need an "ASK RENE" corner beside Dave's lol, I bet we hear a lot of stories and people add Rene's name to make it sound legit...
 

sick1

Active VIP Member
Joined
Oct 25, 2009
Messages
419
Reaction score
416
Location
Spruce Grove
I does happen. 8 tooth with 2.5 inch track 5000km no issues. converted to 7 tooth with 3 inch. lost 2 sets in one season. Pretty lame.
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
I does happen. 8 tooth with 2.5 inch track 5000km no issues. converted to 7 tooth with 3 inch. lost 2 sets in one season. Pretty lame.

Thanks for piping up, these guys seem to thing im talking out my a$$

Heavy wet snow is hard on them. no issues in my neck of the woods with the light fluffy stuff

Your not running a gen 4 with a turbo as of yet. I never said the xm was prone to it, i said the gen 4 has had failures

We need an "ASK RENE" corner beside Dave's lol, I bet we hear a lot of stories and people add Rene's name to make it sound legit...

Im just forewarning people, ive seen it more then once. I used Rene because if you look on his facebook there is a picture of it somewhere. thanks for ur helpful contribution tho..
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,641
Reaction score
18,935
Location
Edson,Alberta
The xms with a turbo can spin the driveshaft in the driver. Seen it more than once, so I would imagine the G4 also has the potential to do the same, since the 6t 3.5” and the 7t 3.0” driver are the same diameter.
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
The xms with a turbo can spin the driveshaft in the driver. Seen it more than once, so I would imagine the G4 also has the potential to do the same, since the 6t 3.5” and the 7t 3.0” driver are the same diameter.

Your probably rite, although i cant comment on the xm one cause i haven't seen it yet. Then gen 4 ive seen... Now that ive said that watch mine turn to dust lol
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
903
Reaction score
1,358
Location
Alberta
I’m going to start at 5 psi boost on my silber 850 with stock drivers I ran my Xm 800 boost-it intercooler at 7-8 psi with stock drivers 2200 Kms until I sold it but I agree it’s much nicer riding thru the snow than walking thru it..... or even doubling out from the back Hope this Silber is the ANSWER
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
I’m going to start at 5 psi boost on my silber 850 with stock drivers I ran my Xm 800 boost-it intercooler at 7-8 psi with stock drivers 2200 Kms until I sold it but I agree it’s much nicer riding thru the snow than walking thru it..... or even doubling out from the back Hope this Silber is the ANSWER

theres a very few elite riders that can actually use more then 5lbs.... i would go out on a limb and say no one actually needs more then an efficient 5lbs. anything after that is a measuring contest. thats my opinion
 

kanedog

Active VIP Member
Joined
Feb 3, 2015
Messages
3,142
Reaction score
8,636
Location
Kanedog 2015-2019, thanks for the good times S&M!
theres a very few elite riders that can actually use more then 5lbs.... i would go out on a limb and say no one actually needs more then an efficient 5lbs. anything after that is a measuring contest. thats my opinion

I know of no turbo company that invests the time to put efficiency into their kit. Heck, they throw in heavy weights, heavy springs, steeper helix and call it good. Now it's lazy and goes blaaaaaah, blaaaaaaah or, like a few kits that scream and don't go anywhere also.
An efficient 5lbs is great I agree. Anything over 150hp is just wasted track spin. If you can get 150hp to hookup you will be king. Listen carefully to turbo sleds on a good, loaded climb. The sled should sound like it is "grunting" and you will notice it constantly accelerating. Not screaming at 8400 and not inconsistent rpms. Maybe 5% of tuners can get this done. If I come across someone that can, I'll post up their name. Kanedog.
There is no motorsport that promotes track spin like snowmobiles. It's like we are retarded.
 
Last edited:

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
I know of no turbo company that invests the time to put efficiency into their kit. Heck, they throw in heavy weights, heavy springs, steeper helix and call it good. Now it's lazy and goes blaaaaaah, blaaaaaaah or, like a few kits that scream and don't go anywhere also.
An efficient 5lbs is great I agree. Anything over 150hp is just wasted track spin. If you can get 150hp to hookup you will be king. Listen carefully to turbo sleds on a good, loaded climb. The sled should sound like it is "grunting" and you will notice it constantly accelerating. Not screaming at 8400 and not inconsistent rpms. Maybe 5% of tuners can get this done. If I come across someone that can, I'll post up their name. Kanedog.
There is no motorsport that promotes track spin like snowmobiles. It's like we are retarded.


100% agree. when i put my p-85 and team on my boost it xm. my 5lbs that felt meh... turned into 5lbs of short bus, window licker, ear to ear grin. Mind blown.
 
Top Bottom