List of Fixes

[maierch]

Don't you worry there bud, already experienced the Y pipe bolts disappearing. Nord Locks took care of that problem. Chain case oil already changed as well, and I will buy a new sprocket and chain this summer. Rave valves cleaned when new engine went in thanks tho!!

Guess I should have kept reading before replying!

 

[~Rowdy~]

those look like WAHL drivers?

The extroverted driver? What's wrong with the WAHL driver? I just got what I was told, lol.

Rowdy, is that the adjustable limiter strap?

I got the material from a supplier in Calgary and cut the straps myself. I made holes so that I can do the adjustments.

 

[maxwell]

ya they look like wahl drivers. i could never keep them in a sled for more than a season. switched to avid much better product.

 

[~Rowdy~]

Fired you a PM maxwell.

 

[bhowes]

sealed the crack in my skapula
plated hooked and screws in bad clavical
JB scartissue weld for the 8 broken ribs
good to go and looking for blue bird skys in revvy this weekend as pain killers

 

[~Rowdy~]

sealed the crack in my skapula
plated hooked and screws in bad clavical
JB scartissue weld for the 8 broken ribs
good to go and looking for blue bird skys in revvy this weekend as pain killers

Holy Moly! I'm hoping your feeling better now! Ouch!

 

[Modman]

ya they look like wahl drivers. i could never keep them in a sled for more than a season. switched to avid much better product.

Wahls seem to work fine on lots of boosted sleds...... I've been running Wahls for a few seasons on both sleds and no issues, they are lasting well at 180+ HP. The only place I would spend the big $$$ for drivers is on a set from Mountain Magic for the CNC'd ones.

 

[~Rowdy~]

Wahls seem to work fine on lots of boosted sleds...... I've been running Wahls for a few seasons on both sleds and no issues, they are lasting well at 180+ HP. The only place I would spend the big $$$ for drivers is on a set from Mountain Magic for the CNC'd ones.

Thanks Modman. I'm not sure if mine are WAHL's or not, but in the rip down the alley I took they seemed to work good! My sled seemed to have a lot more giddy up too. Probably the new track combined with the new drivers. Pumped to test it all out this weekend.

 

[AkNomad]

What have I done to my sled this year.......

Broke my windshield trying to remove paint from it. Who needs a windshield anyways......lol
Installed vents on lower side panels and knee area.
Swapped out my rev brake handle/resevoir for an XP model. No more broken brake light switches!!
Installed Flow Rite next to speedo.
Replaced all 3 bushings, bolt and nut on left ski.
Cleaned both the primary and secondary cltuches.
Nothing too serious and I didn't miss a ride all year

Installed a Polaris Powder Keg tunnel box on wifes rev Summit, took a little modding to her sled it but it looks good and fits nice and snug. Too bad it won't hold but 2 beers.
She also needs a new front bumper, not the wife, the sled.

 

[~Rowdy~]

What have I done to my sled this year.......

Broke my windshield trying to remove paint from it. Who needs a windshield anyways......lol
Installed vents on lower side panels and knee area.
Swapped out my rev brake handle/resevoir for an XP model. No more broken brake light switches!!
Installed Flow Rite next to speedo.
Replaced all 3 bushings, bolt and nut on left ski.
Cleaned both the primary and secondary cltuches.
Nothing too serious and I didn't miss a ride all year

Installed a Polaris Powder Keg tunnel box on wifes rev Summit, took a little modding to her sled it but it looks good and fits nice and snug. Too bad it won't hold but 2 beers.
She also needs a new front bumper, not the wife, the sled.

hehehe nice


and yes, you don't need a windshield. Just extra parts...kinda like my brake cable that tells me my park brakes on haha

 

[imdoo'n]

so where is rowdy at, with the 04 rev rebuild?

 

[~Rowdy~]

All done except one last thing to put in the clutch and the rear suspension.

 

[maxwell]

dont F*ck up.

 

[Trashy]

dont F*ck up.

That is such a positive post

 

[maxwell]

yes. and true.