Everything BaoFeng & VHF Radios

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Hey just thought it was high time we started a thread to discuss everything VHF radio.

Questions about what to buy, how to program it, what works and what doesn't.

I believe 8 Watt VHF Radios don't have to be a big investment, but I do think all riders should have them.
I will be making a spreadsheet and file for people to use when programming their radios.
It will have VHF channels for sledding, a snow and mud emergency channel for everyone to monitor as their second frequency, all the resource roads, bca channels, FRS, GMRS, trucker channels and a few others.

Here is the link to the radio images.

https://drive.google.com/drive/folders/1dOJNiaFXsod4lcEv6QhckanrxHzSMSS3?usp=sharing
 
Last edited:

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
https://baofengtech.com/

A good source for a couple different 8 Watt Boefengs and authentic Nagoya antennas.
A little bit in the pricey side but the company resides in the USA and keeps stock.

Shipping on a handheld is usually $14 USD.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
https://www.radioddity.com

A good source for a couple 8W Boefengs.
My favorite is the UV-3TP with the 3800mah battery.

I'll expand on this a little bit later.

Free shipping directly from China via Canada Post.
 

X-it

Active VIP Member
Joined
Jan 8, 2007
Messages
7,915
Reaction score
18,048
Location
Prince George
After going through a few hundred radios I will have to add this, I think those chinamen put every dam hardware in every dam radio out there. Pofung Nktech and Baofeng 5 watt 8 watt I doubt many could tell the difference. 2 days ago a simple UV-5r was picking up a signal 25k away. Zastone and tyt seem better built and heavier, although I have not tested ranges. I guess i should take the time to do this, but why, all i would get is a bunch of flack like skegpro got. Antennas do make a difference.
 

broke'n'nuts

Active VIP Member
Joined
Nov 16, 2011
Messages
518
Reaction score
1,379
Location
North Okanagan
If this thread can stay on track it will be good. Any info is good info as far as I'm concerned. It's nice to know there is other options. I bought 2 radios from Ray, quick replies and sent out next day. Pre-programmed is What I liked. To busy with other things to dic$ around with that. The more info the better as far as I'm concerned. Ranges, antennas, different mics. I like being able to monitor 2 different channels. Think that's a neat feature. That being said I haven't played with them much yet.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
After going through a few hundred radios I will have to add this, I think those chinamen put every dam hardware in every dam radio out there. Pofung Nktech and Baofeng 5 watt 8 watt I doubt many could tell the difference. 2 days ago a simple UV-5r was picking up a signal 25k away. Zastone and tyt seem better built and heavier, although I have not tested ranges. I guess i should take the time to do this, but why, all i would get is a bunch of flack like skegpro got. Antennas do make a difference.
Meh if it saves some ungrateful kunts life it's worth it.

These radios saved me once, just paying it forward.

I definitely look forward to your input.
 

X-it

Active VIP Member
Joined
Jan 8, 2007
Messages
7,915
Reaction score
18,048
Location
Prince George
I have tried quiet a few different mics so far, One did not even work, it was waterproof. I also have 3 coming. Best one so far is Bridgecom . Two out of the 3 coming look very similar to the Bridgecom. I will let you know how that turns out.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Ok, so I threw together a couple images for people to use.
One of a UV-G3TP and one of a UV-82HP.

Looking for feedback.
Basic necessities. Not much else.
I put together 5 Channels Sled#1-5 based on the 2M band plan for British Columbia and on a 15Khz spacing rasta as per standard.
I used a tone code as I find this helps with interference in addition to squelch.
I designated the national atv cordnation channel as our HELP! channel.
And then RR channels and all the fluff.

Help! is to be monitored on A.
B is to your mic talking channel, Sled#1-5

This way i figured if you actually need help you can switch to A and when you call someone from outside your group may actually be listening. (if we get enough buy in)

Google Drive Link: https://drive.google.com/drive/folders/1dOJNiaFXsod4lcEv6QhckanrxHzSMSS3?usp=sharing

https://bcarcc.org/2mbpa_ch.pdf
 
Last edited:
Top Bottom