Clutch wont give

[Ol' Skool]

Im trying to pull the stock clutch on a '07 Dragon. Using a puller like Ive done many times before. Everything was going good until the outer half of the clutch spun loose. Inner half wont budge and now there is nothing to hang on to. Ideas?

 

[jjack]

well if you can,I use the outer threads anymore get a machine shop to build you a sleave and hydrolic it off

 

[Clode]

take the sled outside, tip on its side, fill the centre with water, thread in puller to engage threads, and walk away and let the water freeze...pop clutch is off after a few hours

 

[waynemags]

take the sled outside, tip on its side, fill the centre with water, thread in puller to engage threads, and walk away and let the water freeze...pop clutch is off after a few hours

damn that's good idea

 

[Ol' Skool]

I got it! Pulled the outer half off. Tipped it on its side. Threaded some soft rope into the PTO side cylinder, so the motor cant spin. Used the puller again, and the inner half popped right off! Boom