Chinese diesel heaters for enclosed sled trailer

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
142,036
Reaction score
56,147
Location
Leduc
Is there some kind of screen to keep the bugs etc, out of the exhaust in the warmer months, when it's not in use?

My exhaust goes out the bottom of my trailer. No issues yet.
 

zal

Active VIP Member
Joined
Jan 11, 2009
Messages
2,471
Reaction score
8,014
Location
Northern AB & BC
Anyone having issues running the heater down the road? I’ve tried twice and both times the heater threw E-08 code. Works fine when sitting there.
 

struglin

Active VIP Member
Joined
Dec 1, 2010
Messages
1,032
Reaction score
1,906
Location
Millerville
Anyone having issues running the heater down the road? I’ve tried twice and both times the heater threw E-08 code. Works fine when sitting there.

Always use mine to and from Revy no issues
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
142,036
Reaction score
56,147
Location
Leduc
Anyone having issues running the heater down the road? I’ve tried twice and both times the heater threw E-08 code. Works fine when sitting there.

Last winter I drove from Rocky to Leduc with it running. No issues
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,826
Reaction score
7,180
Location
Alberta
Anyone having issues running the heater down the road? I’ve tried twice and both times the heater threw E-08 code. Works fine when sitting there.
Not sure what the code is but Where is your vented? The wind from moving is prob tripping your air proving switches.
 

zal

Active VIP Member
Joined
Jan 11, 2009
Messages
2,471
Reaction score
8,014
Location
Northern AB & BC
Not sure what the code is but Where is your vented? The wind from moving is prob tripping your air proving switches.
That’s what I thought too. The exhaust is coming out of the v nose. I built a 90° elbow to blow the exhaust towards the back of the trailer, that way the air from the truck doesn’t affect it and it still tripped the code.
 

Bernoff

Active VIP Member
Joined
Mar 11, 2010
Messages
1,385
Reaction score
1,338
Location
Edmonton
Can that elbow be what causing problems. Its creating to much suction. Just a thought.
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,826
Reaction score
7,180
Location
Alberta
That’s what I thought too. The exhaust is coming out of the v nose. I built a 90° elbow to blow the exhaust towards the back of the trailer, that way the air from the truck doesn’t affect it and it still tripped the code.
What about the intake? Maybe it doesn’t like ram air!

Did you research the code?
 

zal

Active VIP Member
Joined
Jan 11, 2009
Messages
2,471
Reaction score
8,014
Location
Northern AB & BC
Well I may have figured it out. The heater made it all the way home without shutting down.
I’m pretty sure I have been starting the heater and not getting it up to speed before taking off in the truck. I also went from 1.4 pulse to 1.5.
Next time out, I’ll know if it was a fluke or not lol.
 
Last edited:

Bernoff

Active VIP Member
Joined
Mar 11, 2010
Messages
1,385
Reaction score
1,338
Location
Edmonton
You guys know how long a brand new 12 volt rv battery will run heater?
 

Modman

Active VIP Member
Joined
Mar 13, 2008
Messages
6,031
Reaction score
8,453
Location
Castlegar
Well I may have figured it out. The heater made it all the way home without shutting down.
I’m pretty sure I have been starting the heater and not getting it up to speed before taking off in the truck. I also went from 1.4 pulse to 1.5.
Next time out, I’ll know if it was a fluke or not lol.
I built a couple of these "diverters" for intakes and exhausts over the years. Seem to keep the intakes and exhausts from being force-fed air that causes backpressures issues.
 

Attachments

  • Diverter.jpg
    Diverter.jpg
    246.6 KB · Views: 232

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,047
Reaction score
6,783
Location
Edmonton
Finally figured out my issues and talk about starting at the wrong end of my problem. Cleaned it , reprogrammed it a Fawk my life , still have of issues although programing it reduced the amount of smoke it would only run for about 1/2 hour and die with a 08 code. Went through a list of possibilities and the vent cap was one of the possibilities, sure enough could blow on it from the inside out but there was no way in hell it was getting any air so I put a vent line in the cap and it ran yesterday for 5 hours? Shut er down yesterday, got up this morning and give another 6 hours … All hood! 👍🏻😁🍺
 

Attachments

  • A59028EE-62CF-480F-AD67-9C2759EE2147.jpeg
    A59028EE-62CF-480F-AD67-9C2759EE2147.jpeg
    197.2 KB · Views: 132

Bernoff

Active VIP Member
Joined
Mar 11, 2010
Messages
1,385
Reaction score
1,338
Location
Edmonton
I thought it was only on the highway that it was quitting but good you got it resolved.
 
Top Bottom