Changing plugs on a turbo doo

[snochuk]

Good grief on that job.
Brothers sled was running on one cylinder.
Sent him up the hill on my sled since he was out from Arizona for a one day ride.
Watched part of a B.R. video on getting top panel off.
Good thing doo did not make it tough with their tuned plugs changes. Enough screws to make cover part of the frame structure.

That would be fun on the hill!

 

[catmando]

You got that Randy,

 

[maxwell]

did it start running on one in the trailer right out of the gate?

they do need a real man tug

 

[snochuk]

Ran good for 20 seconds outside of the trailer, think it got scared of what was coming up in Renshaw.......

I do not want any part of conversations regarding your Doo Man Tugs.
That chit not for me.

 

[snopro]

Its a chit show changing those Randy. Are you still working on it?

 

[The Kickass One]

Good thing it only needs a plug one time!!

 

[snochuk]

1950km on Boost and zero plug changes.

900km on the doo and its let's scrape some knuckles and beer time to get it past the trailer.
It's out of break in, should be good now......lol

 

[High Velocity]

1950km on Boost and zero plug changes.
…. lol

800 km on my Boost and zero issues with original plugs.


Sent from my iPhone using Tapatalk

 

[TDR]

350 miles on my Boost and no plugs.

 

[greenthumb]

Best trick I have found for 850 plugs is to use a flex head ratcheting wrench on the hex part of the socket. Usually a 19mm or 3/4".

Doo's seem to be susceptible to fouling a plug when they are cold started and shut before warming up. (such as a quick load up) XM's in particular. You can usually clear it up by running wfo down the trail for a little bit.

 

[The Kickass One]

2700km on 2023 Turbo and it’s been mint!!

 

[Travco28]

Buy the plug wrench from RiderZ it works realy good .

 

[DV-ENT]

Doing any work on the doos is a chore!.. has been for years... French designed!... hell old Justin probobally had a hand in the design!

 

[brian h]

I haven't done the turbo but the 850na can be done easily without removing the hood and no special tools. imo can be done faster than removing hood.