Axys Mods/ Improvements/ Add ons

[AxysAssault]

As with all of the Polaris RMK sleds (including mine) a throttle block upgrade/fix. I took out the set screw on the bottom and threaded/tapped the handle bars and threaded/lock tighted a screw in. Put ty-wraps over it and electrical taped the hell out of it. Third Polaris sled now that the throttle block slipped of and wobbled on the handle bars-nothing more frustrating.

I keep my block just tight enough so if I hit something and smash my thumb on it, it moves instead of my thumb. I've never had an issue with it moving while riding.

 

[Scotford]

Gave my axys some upgrades for this season... just took the new side kick for a test run and as they say runs flawless and I tested from 3800' too 6000'

 

[Pink-Inc]

Gave my axys some upgrades for this season... just took the new side kick for a test run and as they say runs flawless and I tested from 3800' too 6000' //uploads.tapatalk-cdn.com/20171111/58f31928872bcf69a8b48dfe11dae114.jpg//uploads.tapatalk-cdn.com/20171111/625590004b1cbce1fc2adc130ef82216.jpg

I was looking at throwing a muff pot in that same spot. Good to know it works. Does your silicone 90 off the turbo inlet rub on the body panel?

 

[Scotford]

I was looking at throwing a muff pot in that same spot. Good to know it works. Does your silicone 90 off the turbo inlet rub on the body panel?

Nope still lots of clearance and it's a tight fit with muff pot but hey it still works and still cooks my steaks

 

[neilsleder]

Gave my axys some upgrades for this season... just took the new side kick for a test run and as they say runs flawless and I tested from 3800' too 6000' //uploads.tapatalk-cdn.com/20171111/58f31928872bcf69a8b48dfe11dae114.jpg//uploads.tapatalk-cdn.com/20171111/625590004b1cbce1fc2adc130ef82216.jpg

That’s a deadly looking sled!

 

[Shredder]

I want a turbo so bad. Can't justify the cost for the amount I get out though. Sweet sled; I bet she rips....

 

[snowseeker]

I want a turbo so bad. Can't justify the cost for the amount I get out though. Sweet sled; I bet she rips....

You will get out lots this year so let's get it done while she is still in Edmonton!

 

[Shredder]

You will get out lots this year so let's get it done while she is still in Edmonton!

I'll put your company logo on my sled if you can talk Dad into sponsoring me a Boondocker Sidekick. Oh.... and maybe change your profile pic... that was like 5 sleds ago.

 

[snowseeker]

I'll put your company logo on my sled if you can talk Dad into sponsoring me a Boondocker Sidekick. Oh.... and maybe change your profile pic... that was like 5 sleds ago.

I could make that decision as the owner of the company and sorry bud, have to say no.
I like the old picture.

 

[JustinMan43]

Do any of you guys know if the stock axys rear bumper fits on a pro chassis? Mounts looks extremely similar

 

[Shredder]

Not sure. I have one of each. I can check it out.

 

[takethebounce]

Do any of you guys know if the stock axys rear bumper fits on a pro chassis? Mounts looks extremely similar

Stock to stock should be the same.

Aftermarket Pro rides bumpers sometimes have a slightly higher fit to them vs the Axys.

 

[maxbed]

has anyone tried the mtntk blowhole? ive got a buddy who has it on a doo and he likes and i was thinking about trying it out.

 

[takethebounce]

has anyone tried the mtntk blowhole? ive got a buddy who has it on a doo and he likes and i was thinking about trying it out.

Unless you are experiencing extreme belt temps I wouldn't worry. Polaris generally has better stock clutching and better performing clutches. They can obviously use a little more weight. Are you bowing belts? Polaris belts tend to delaminate when over heated. I am not running the stock polaris belt so I don't know if the Axys belt has been better than the Proride belt.

 

[HotShotHarry]

has anyone tried the mtntk blowhole? ive got a buddy who has it on a doo and he likes and i was thinking about trying it out.

Got one on my 14 Turbo PRO. Blows out a lot of hot air. 3 seasons-no issues.

 

[HagmanMod1]

Brent at Arctic Edge Motorsports has a great Exhaust Setup give him a call

 

[RMKward]

Any one running the pipe and can kit from jaws?

 

[adamg]

Any one running the pipe and can kit from jaws?

I bought one at end of last season. Hope to try it in about 10 days.

 

[slededjr]

Turns it into a totally different sled. You won’t be disappointed.

 

[team_ktm]

Has anyone run nos on there axys yet? Got a buddy that might want to put on a 30-40shot from boss nos.