Aftermarket can and spare belt placement

[carlsonswerve]

Found a can from specialty sleds that is close enough to the oiltank that i can put spare belt against front bulkhead support. Used velcro strip to hold it against old spring support. have lots of clearance so wont scorch belt. Can from these guys is a little bit of a pain in the a$$ to fit in so the exhaust dumps out but seems good now.

 

[Dobir]

Pics I have the same challenge

 

[carlsonswerve]

ill try to get pics and post them later. are you talking about placing the belt or can fitting?

 

[carlsonswerve]

this is how i have mine set up. might change slightly. had to trim rubber on bulkhead mount to get exhaust to dump out properly. seems good now

 

[Shanerd]

Great idea...will be doing that too....thanks for the info.

 

[Shredder]

Hopefully I will get my Jaws can by the end of next week. Looks like a pretty good spot for the belt there for sure.

 

[chriscat1000]

How loud is that can

 

[carlsonswerve]

not bad, no worse then most, but still has a presence

 

[Dobir]

If I dont give up on this whole pro climb deal I will be addidng a jaws or speedwerx can and trying to fit a belt there too...pics when you add the jaws would be great..

 

[CatRpillar]

Belt can go under the seat. I changed out the torx head on the seat to a flat head so I can spin it off with a coin.

 

[CatRyder88]

Id like to know which dealer got you the spare belt. Don's hasn't got mine in yet. And i dont really wanna head to the hills without a spare.

 

[chriscat1000]

Echo in Edmonton is in the same boat.

 

[carlsonswerve]

tried to fit belt under seat but figured cold belt thats been mashed into place wont work well. lol too many folds. spare from my old sled lol. new spare isnt here. and no way im heading to the hills without a spare or two. maybe three? sell them like crack in the parking lot

 

[Shredder]

Curtis at T&T figures that he will have their shipment of belts this week. I asked the same question about how Cat didn't have them ready to ship with the sleds when I picked mine up; "Great I have my new sled; but I can't take it anywhere until I get a spare belt."

 

[Stumperxxx]

Bought my sled yesterday, I had a jaws can put on and It sounds amazing!!! Fits great too.... No complaints from this feller...

 

[Mike270412]

Belt can go under the seat. I changed out the torx head on the seat to a flat head so I can spin it off with a coin.

That's a great idea! I noticed there was a trunk in there with no easy access. Not sure why they left it like that

 

[insaneboltrounder]

Saw online that the 046 and 020 belts are almost exactly the same as the belt for the 12s. Good for spare for sure