165 Alpha gets weighed

rhody605

Active VIP Member
Joined
Dec 28, 2014
Messages
258
Reaction score
485
Location
Spruce Grove
Saw about 5-6 alphas at chappel
Today. 1 was in our group. His ran great and offered some test drives to some lucky peeps.

1 had an unknown electrical issue. Would start then after trying to move would just die.

3 others had a small issue with the middle track clips peeling away some plastic on the sliders.

Came across 2 aggressive riders both with broken snow flaps.

One of those 2 was losing bolts for his seat.

Everyone who rode them said they were awesome. Well except for the guy with an electrical issue. Lol.
 

Eldereldo

Active VIP Member
Joined
Feb 15, 2014
Messages
439
Reaction score
532
Location
MD Foothills/Whistler
Saw about 5-6 alphas at chappel
Today. 1 was in our group. His ran great and offered some test drives to some lucky peeps.

1 had an unknown electrical issue. Would start then after trying to move would just die.

3 others had a small issue with the middle track clips peeling away some plastic on the sliders.

Came across 2 aggressive riders both with broken snow flaps.

One of those 2 was losing bolts for his seat.

Everyone who rode them said they were awesome. Well except for the guy with an electrical issue. Lol.

It’s great to come out with a game changing sled, but they really need to get their **** together on their build quality.
 

Rjjtcross8

Active VIP Member
Joined
Dec 7, 2011
Messages
907
Reaction score
962
Location
Bruderheim
Saw about 5-6 alphas at chappel
Today. 1 was in our group. His ran great and offered some test drives to some lucky peeps.

1 had an unknown electrical issue. Would start then after trying to move would just die.

3 others had a small issue with the middle track clips peeling away some plastic on the sliders.

Came across 2 aggressive riders both with broken snow flaps.

One of those 2 was losing bolts for his seat.

Everyone who rode them said they were awesome. Well except for the guy with an electrical issue. Lol.
Thanks for sharing, the snow flap thing Is not uncommon. I ordered a different style for mine.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
141,933
Reaction score
56,107
Location
Leduc
How was weight with snow on them?

Did they hold a lot in the track area?
 

Baraaaaaap Obama

Active VIP Member
Joined
Oct 31, 2016
Messages
163
Reaction score
652
Location
Vernon, BC
Had mine out for a lil rip bud.... It holds virtually nothing... The whole box beam thing kept about a 1/2" layer of snowy/ice on it most the day and that's about it. The rest just falls out... It's noticeably alot easier to flip over by yourself out of the snow compared to a XM
 

Kibbels

Active VIP Member
Joined
Dec 11, 2008
Messages
1,239
Reaction score
3,190
Location
Central Alberta
Had mine out for 2 days in Revy... very impressed with this sled. The Ctech 800 is very strong and excellent torque! Break in day it was @8100 & 67-68 km/h .. didn’t check today. I believe I have that electrical issue as it cut out 4 times on me. From what I’ve learned one or dealer must reroute a connector near steering post. Other than that it’s an amazing sled out of box. I just need to get in better physical shape to ride to its potential.
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
All the cat sleds I been around needed the throttle safety switch bypassed. They have buggered up. Will sit there and run but touch the throttle and die.
 

Lund

Active VIP Member
Joined
May 4, 2013
Messages
4,247
Reaction score
11,288
Location
Vernon/Kelowna
All the cat sleds I been around needed the throttle safety switch bypassed. They have buggered up. Will sit there and run but touch the throttle and die.

The Yamaha use's the same setup on the SW and i never have had an issue. My wife and a friend of mine both on Cat have had issues. What i found is the Cat switch is too dry(not enough dielectric) and water will work into the switch as it is not sealed. I replaced both switches on those 2 mentioned sled's and filled the cavity with dielectric and so far no problems.
Yes this is a problem with many Cat's but also if the throttle cable is not set up or routed properly you will get the same results and from what i have seen some are not setup properly when they get PDI. That i believe was more the issue with the 2 mentioned above and not so much the switch it self.
 
Last edited:

sc800

Active VIP Member
Joined
Nov 3, 2008
Messages
1,405
Reaction score
1,947
Location
Living life at the Lake!
Had mine out for a lil rip bud.... It holds virtually nothing... The whole box beam thing kept about a 1/2" layer of snowy/ice on it most the day and that's about it. The rest just falls out... It's noticeably alot easier to flip over by yourself out of the snow compared to a XM
You got any pictures of your sled?
 

Xmrider163

Active VIP Member
Joined
Dec 20, 2013
Messages
377
Reaction score
1,016
Location
Beaumont
259985a976bb33182ef4363ae48e21df.jpg




Now I know the Ski-Doo was the heaviest sled of 2019 for the 2strokes but I didn’t know they were this heavy haha!

Seen this on my way home from Revy pretty cool setup!
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,845
Reaction score
10,108
Location
Cold Lake, AB
Wow that is cool.

Two guys to a bunk, not so cool.

Whats he got going on for rear tires there?
Those super singles?
Looks like standard rubbers, just no inners. Sweet setup though! Must suck back the fuel though.
 
Top Bottom