Search results

No to Mcbride, save your money & wait for some new snow.

It must have been done when the update was done, but instead of drilling the hole up as high as it could be, they drilled it just over half way & as a result the wire was still rubbing.

Thought I would let all the owners of 08 doos know this.Went out for a Saturday ride with a friend, everything was going well...... for the 1st 4 miles. Check engine light came on, stopped, checked it all over, no issues found. Took off again ripping across a long open field & WTH can't get the...

To you who did this.... stay the hell out, you are not wanted. I,ve been going to McBride for 7 years now & of all the stupid things i have seen or heard, you just surpassed all. And if that makes you proud you don't deserve to breathe the same air as any respectful,free person. I have seen the...

Agree, made many trips through there, stay on 22 to the #1, you will not save 1/2 hr. going through the Reserve. Google map it & switch the route of travel & you will see for yourself.:beer:

I'm with you Barry, well said, enough said. RESPECT, RESPECT, RESPECT is all that is required. Thank you Barry.

I agree with RMK JUNKY, Shell Rotella is a awesome oil & a lot cheaper than most, just by it by the pail ( If I recall correctly, it's about $52.00 for a 20 L pail ).Wix filters are also very good ( was told that is who Dodge gets to make their filters ) & way cheaper than the best deal the...

And a few more from this weekend. Yes, that is bbtoys in pic #3... sorry Barry, I know you did not want it posted, but I had to do it. Pic #4 is rbsledding making nice with the local vegetation. .

Here is a few more from Renshaw & Belle this past weekend.:d

The Can. Tire store on 178 Street, Edmonton still has a lot left, just picked up 3 jugs, thought I would leave some for someone else.

H2SNOW, thanks for the post of items in your backpack, some i never thought to carry till i read it & then it's like... Ya,that makes sense to have that.

Your 700 has plenty of power to turn a 144 x 2" track, you can go a lot of places with that track. I kept my 700 Summit with a 144 x 2" (because every now and again it's a riot to drive the smaller track especially through the trees) & I could go most places. The only time your going to have...

If you have WD40 use that, don't go out to spend extra money on goo gone. Not knocking it, it does work, just saying if you already have the WD 40 use it, then clean with hot water & dish soap, rinse & enjoy a beer.:d

I had a 2002 Dodge 1500, I could legally pull my 7000 lb holiday trailer. The trailer axles were far enough ahead that the weight transfer on to the hitch was legal as were the the axles on my pick - up & the trailer. I made sure of this because i was going on holidays in B.C. That being said...

Modman said it. And about not going through a scale, well if you are going Hwy #16 in to B.C. you go right past the scale at Tete Jaune, no avoiding it. Year before & last year too we went through there & the D.O.T. & the R.C.'s were only pulling in the sledder's to check for load securement...

I agree with takethebounce, if you wanted the lightest sled out there you should have researched before you bought. Take the fact that you like the Cat (don't worry about the 20 or 30 lbs. difference or whatever), they have been good to you & enjoy it. If you think what we used to ride even even...

I agree with Summitric, no real sure-fire way to increase the capacity of the G.V.W. If you get stopped & they run the s/n or your license it will automatically tell them it's a half ton, no trick emblem's will get you away from that. You can get a 3/4 ton front suspension & rear axle, then get...

I have had the V-Force Reeds on for quite awhile & no problems so far, worth the upgrade IMO.

The 05/06 900's had there problem's & they are HEAVY, if you have some time & money look for a 08 700, good power, even if you are a 200 ish pound guy. Be a little more wary about the 08 800's, had some problem's but nothing like the 07 rev 800's. If you are looking for something in the 1998 to...

Personally speaking, go for the Rev 800, try to get a 06, stay away from the 07's unless like was previously said it has the 08 motor & the clutch has been done. Another option that you will not go wrong with is a 07 or 08 rmk / rmk Dragon 700, very good machine also. Good luck