Search results

  1. CrankShop910

    Map Tun

    What one would you use for a 260-270HP tune??
  2. CrankShop910

    High Boost drivetrain modifications

    I would see if you can get a 3/4 hyvo chain and sprockets, I use too brake 13 wide stuff with only 180NA power. Never broke 3/4 stuff at 250hp.
  3. CrankShop910

    High Boost drivetrain modifications

    How many days on that chain that failed. Was it the stock 13 wide chain.
  4. CrankShop910

    Humorous picture thread

    ralph klein was a drunk too, and he cleaned Alberta up too.
  5. CrankShop910

    Artic cat mono rail.... hmmm...

    How long will that single rail last?? There’s been a lot of twin rail suspension built over the years from the manufacturers, and people have bent them. How much side load will that beam take before it bends. Really neat idea.
  6. CrankShop910

    Pro rmk aerocharger issue

    If the box is easy to remove, try bringing into the room and dry it out. The pressure transducer may have moisture in it. Ive chased my tail one weekend with a bad AFR sensor, was reading lean no matter what it did. But you could tell it was pig rich.
  7. CrankShop910

    Pro rmk aerocharger issue

    yes. It is. Ken from Mountain magic can get a new style of box with a external boost sensor, they run way better with the new box.
  8. CrankShop910

    Pro rmk aerocharger issue

    When is the last time you change your fuel filter. You shouldt be maxed out on your boost settings at six pounds. 12.5 to 12.8 on straight AV. does your dobec box have a little line going to it,??
  9. CrankShop910

    Pro rmk aerocharger issue

    Afr at 14 on the trail, wot?? It could be a AFR Senor gone bad?
  10. CrankShop910

    what reeds did Neil use on the boost-it pros?

    Just make some reed stops for the bottom set, and run stock.
  11. CrankShop910

    Buying Propane?

    I was at the old propane shack off of 17street today. I payed 72.00 to get a 100lb filled. There was a sign there. On Wednesday its 9.50 to fill a 20lb.
  12. CrankShop910

    Boost-it help?

    Compression is a little on the low side, maybe pull the y pipe and see if the pistion are scuffed. And check the reeds.
  13. CrankShop910

    Colten boushie case

    I bet all that wasn't brought in the the case.
  14. CrankShop910

    Spark plug comes out

    It’s detonation,the squish is too tight for western Canada. Even with 100LL
  15. CrankShop910

    how not to haul a excavator

    Someone should call the office and see if they are hiring a lowboy driver. Wow
  16. CrankShop910

    Canadian Sniper sets new record again!

    I ran some numbers on that shot. So a 750gr A max with a MV of 2820fps , 200 yard zero,, would need approximately 195moa or 7137 inches hold over. The bullet would still have 1438 foot pounds of energy and moving at 900 fps. A 10 mph cross wind would add 50ish moa. One hell of a shot.
  17. CrankShop910

    STOLEN TRUCK -- SHERWOOD PARK AREA-- May 2, 2017

    you only go to jail if they find the body.
  18. CrankShop910

    Old Custom Mountain Sleds -Where do they go?

    Yep, when you had to buy a Indy 400, swap the moter out with a 521,583 or a 617 Rotax. Then install five tooth 2.52 drivers so you 2"plastic paddles will fit on that long track 133. Lol.
  19. CrankShop910

    Old Custom Mountain Sleds -Where do they go?

    Just wait for it. LHF??
Top Bottom