LBZ
Active VIP Member
Last trip out on the way out of owlhead did a little fooling around in a meadow and it started to backfire and miss like it was hitting the rev limiter but it wasn’t revving past 7200-7300. Was doing it on the trail out too. It’s never done this before except in hard pack but it was actually revving up too fast that time. This time was in a couple feet of fresh.
Looked it over and I only thing I found was one of the clickers was at 1 and the rest at 3 where I had set them. Put them all back to 3 and it’s still doing it. Looked around and didn’t find any wires off or rubbed through.
Any ideas where to look next? Was thinking of checking the reeds but it has no problem going into reverse so not sure it’s that either.
Looked it over and I only thing I found was one of the clickers was at 1 and the rest at 3 where I had set them. Put them all back to 3 and it’s still doing it. Looked around and didn’t find any wires off or rubbed through.
Any ideas where to look next? Was thinking of checking the reeds but it has no problem going into reverse so not sure it’s that either.