Working on the cat.

[niner]

Lol, may have traded it.

Good call on trading it. Won’t get much for it on this site. lol. Hope your next sled treats you better. You should have kept the king cat it would have loved the deep snow in Revy.

 

[LMLCHEVY]

Pulling my shock and sending it to Tyler @ Nextech.
Spring cranked, damper maxed, bolt flipped around on strap already. Still made contact.

 

[snochuk]

Pulling my shock and sending it to Tyler @ Nextech.
Spring cranked, damper maxed, bolt flipped around on strap already. Still made contact.

//uploads.tapatalk-cdn.com/20191219/5e416a2d35e5974a503e52da78463e02.jpg

Go to Alpha section.
Monorail Contact thread shows you the bolt you need to install.

 

[Dawizman]

Pulling my shock and sending it to Tyler @ Nextech.
Spring cranked, damper maxed, bolt flipped around on strap already. Still made contact.

//uploads.tapatalk-cdn.com/20191219/5e416a2d35e5974a503e52da78463e02.jpg

Mine has been mint for the week of riding we just did after Tyler got his hands on it.

 

[skegpro]

Do you happen to know the water pump recall number? I like to be prepared for the dealer education session. Heehee

.........

 

[skegpro]

And here is the problem.

https://photos.app.goo.gl/p3nuXWzUGvokL3df9

 

[LMLCHEVY]

And here is the problem.

https://photos.app.goo.gl/p3nuXWzUGvokL3df9

Oh cool.

 

[skegpro]

Found a factory bolt that was making contact with a motor mount/ recoil guide

 

[skegpro]

Cana sled parts steering post bushing installed.

Should have done this from new.
So tight.

 

[skegpro]

Oh cool.

Yeah real cool lol.

I am not real thrilled with the clearance around the impeller either.

The definitely didn't get it centered, can just get a piece of paper in on the left side.

 

[skegpro]

Exhaust valve servo bracket crackin'.

 

[T-top]

How many KM on it? See the left side Powervalve cable melted on mine check yours guys.heat tape it if it hasn’t melted already!!!!!

 

[skegpro]

How many KM on it? See the left side Powervalve cable melted on mine check yours guys.heat tape it if it hasn’t melted already!!!!!

2400km
Melted a set of cables too.

 

[LMLCHEVY]

Yeah real cool lol.

I am not real thrilled with the clearance around the impeller either.

The definitely didn't get it centered, can just get a piece of paper in on the left side. //uploads.tapatalk-cdn.com/20191223/58dfdc38f8511ea589f4379a212d3a22.jpg//uploads.tapatalk-cdn.com/20191223/9450cd763d092fa4578dffa3b21ea792.jpg//uploads.tapatalk-cdn.com/20191223/490f1d77d18b90ab32950c3792d90404.jpg//uploads.tapatalk-cdn.com/20191223/d330dca673fee260208587d812232f29.jpg//uploads.tapatalk-cdn.com/20191223/704fdab41f855f4152cfe7e0c22b99f6.jpg//uploads.tapatalk-cdn.com/20191223/949342b384001596c1a827991f3c88ae.jpg//uploads.tapatalk-cdn.com/20191223/0073a80f4218e47e70733f8dc30ba38d.jpg//uploads.tapatalk-cdn.com/20191223/53698707e1ef506ce3c78ab21663cfc6.jpg

It’s designed that way. They all are offset so it forces the fluid through the outlet. Otherwise it would just be like a mixer in the sink.

 

[bgraff1]

It’s designed that way. They all are offset so it forces the fluid through the outlet. Otherwise it would just be like a mixer in the sink.

was just about to say the same thing

 

[skegpro]

It’s designed that way. They all are offset so it forces the fluid through the outlet. Otherwise it would just be like a mixer in the sink.

No, in the actual recess for the impeller.

There isn't even a paper width of clearance on the NW corner.

 

[skegpro]

......

 

[jpmez69]

......//uploads.tapatalk-cdn.com/20191226/08a7b6fb2abeb4a875ec5cb0724d949f.jpg

It's plastic... It will make it's own clearance. Does the gap change when it's rotated?

 

[skegpro]

It's plastic... It will make it's own clearance. Does the gap change when it's rotated?

Gap stays the same.
And yes it's plastic.

 

[jpmez69]

Gap stays the same.
And yes it's plastic.

Then it's good to go.