Which powersaw to buy

Crustyolddude

Active VIP Member
Joined
Jun 10, 2013
Messages
538
Reaction score
1,332
Location
Fort Saskatchewan
Those things look badass! Definitely the unit to have if a guy were serious about an Alaskan mill. They definitely aren't cheap though!

I error on the size. Thought it was O88 (120cc), however it’s and Stihl o66 (90cc). Haven’t used it a while.....however I attached a Lewis winch to it to haul Bush, moose, deer etc out of the Bush. Works good, however there is no reverse on Lewis winch.
55F68C28-5374-4D07-A8BA-63780ED11E52.jpeg BCC91025-20BA-4BA1-AEF1-E2C163AF21FD.jpeg 59E73053-3844-47BD-AF04-DF207459D182.jpeg
 

deaner

Active VIP Member
Joined
Nov 6, 2008
Messages
3,232
Reaction score
11,238
Location
Creston, BC
Nice saw. Wrong color , but Stihl a nice saw

I'm guessing your mostly joking but I came into this completely neutral, did a ton of research, and it seems like it honestly is a coin toss between the two. My local dealer carries both and there is a ton of logging around here. They said when it comes to the smaller homeowner saws, Stihl definitely takes the win. When it comes to pro saws, most loggers choose the husky. Haven't been able to find a negative review of the 572.

Totally unnecessary for me, but I can't wait!
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,048
Reaction score
6,783
Location
Edmonton
Just stopped in at stihl, the 170 is on sale now for 259.00.Comes with saw, bar attached with chain, spare chain and case . Compared too the 180, I wouldn’t spend the extra money as it’s the same saw as the 170 with easy start and a quick adjust for the chain. Not worth a100 bucks. Think my best bet is too go new unless somebody is under 200 bucks got there next too new one with all the extras.
The salesman told me the 199 sale is usually in the spring. No case or extra chain ( 80 dollar value) you do the math.
 

takethebounce

Active VIP Member
Joined
Dec 10, 2008
Messages
5,193
Reaction score
8,750
Location
calgary
Just stopped in at stihl, the 170 is on sale now for 259.00.Comes with saw, bar attached with chain, spare chain and case . Compared too the 180, I wouldn’t spend the extra money as it’s the same saw as the 170 with easy start and a quick adjust for the chain. Not worth a100 bucks. Think my best bet is too go new unless somebody is under 200 bucks got there next too new one with all the extras.
The salesman told me the 199 sale is usually in the spring. No case or extra chain ( 80 dollar value) you do the math.


The biggest downside to those saws is those micro chains. They don’t cut for crap if you need anything more than a limb trimmer.

Your old Mulloch will out cut those micro chain saws all day. Get any saw not using those micro chains, a MS250 would be my suggestion for an inexpensive home owner saw. On sale I have seen them for about $380.

Totally joking , that is a nice saw you will love it. I own two Stihl’s and a Husky. The ms241c-m is a pro saw.


I have the 261c-m, absolute beauty little saw for 50cc around 10lbs.
 
Last edited:

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,048
Reaction score
6,783
Location
Edmonton
All I need is a little saw for cutting down the odd tree for firewood . I have a little mccullock ive had for 20 years and it finally crapped the bed a couple summers ago, the little stihl would be a step up for me.
 

doorfx

Active VIP Member
Joined
Jan 10, 2011
Messages
10,050
Reaction score
24,523
Location
calgary ab
You can put a 3/8 bar and chain on the ms170 just use 3/8 low pro picco chain.
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,048
Reaction score
6,783
Location
Edmonton
The biggest downside to those saws is those micro chains. They don’t cut for crap if you need anything more than a limb trimmer.

Your old Mulloch will out cut those micro chain saws all day. Get any saw not using those micro chains, a MS250 would be my suggestion for an inexpensive home owner saw. On sale I have seen them for about $380.




I have the 261c-m, absolute beauty little saw for 50cc around 10lbs.

I will look into that, didn’t realize the chains were that much smaller
 

takethebounce

Active VIP Member
Joined
Dec 10, 2008
Messages
5,193
Reaction score
8,750
Location
calgary
You can put a 3/8 bar and chain on the ms170 just use 3/8 low pro picco chain.

Those low pro piccos are still like cutting maple with a butter knife. The PS and PM all cut about the same and I don’t believe you can buy a power head with a 3/8 bar and Picco chain so by the time you set up the 170 probably paid better part of a saw already equipped that runs a better chain.
 

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,048
Reaction score
6,783
Location
Edmonton
I’m thinking it would be enough, not much of a lumberjack lol thx Matt
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,053
Reaction score
86,064
Location
beautiful, downtown Salmon Arm, BC
I have a MS170 and love it! Great little saw. Used it for limbing before I pulled the log out of the bush to the road for the bigger saw to buck up the blocks.

Carried it on the sled and the quad and it got the job done for the trail blow downs.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
141,988
Reaction score
56,115
Location
Leduc
MS 170 is light and easy to pack for small trees
 

Beer Slayer

Active VIP Member
Joined
Dec 2, 2018
Messages
1,417
Reaction score
3,441
Location
Great Lakes
Thanks to all for question and answers on this topic.
You guys have covered every question I had plus quite a few more...
I'm also looking for a new saw, I'm no lumberjack either.
 

takethebounce

Active VIP Member
Joined
Dec 10, 2008
Messages
5,193
Reaction score
8,750
Location
calgary
Thanks to all for question and answers on this topic.
You guys have covered every question I had plus quite a few more...
I'm also looking for a new saw, I'm no lumberjack either.

If you are going to be dropping trees a helmet and face guard are not a horrible idea with some cut resistant chaps. Cheap safety gear really when it comes down to it.
 

deaner

Active VIP Member
Joined
Nov 6, 2008
Messages
3,232
Reaction score
11,238
Location
Creston, BC
This escalated quickly.

All I. Good fun. Little bouncy seems to have a massive chip on his shoulder so it's fun to prod him once in a while.

I wouldn't have said anything if he hadn't replied to fernisnows joke so smugly. Doug's comment was obviously meant in good fun. Yes I think safety equipment is a good idea. I think most people do


Watch. There is no way he will be able to resist replying.
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,053
Reaction score
86,064
Location
beautiful, downtown Salmon Arm, BC
Being safe with a chain saw is being a Karen?

I guess being the “safety guy” at work for a number of years and actually having taken legitimate saw courses after watching my uncle hack off half his head and shoulder gave me a different perspective.

But hey you want to encourage 100 staples holding your thick skull together you go right ahead.

I fully support being safe with a chainsaw. I guess it is the way you come across and address something that has nothing to do with "which power saw to buy'.

Sorry for your trauma regarding your uncle but let's not let that get in the way of "buying a chainsaw".

Maybe, the COVID has you a little up tight and thinking you have the solution to today's problems. Maybe need to lighten up a little...............

I'm guessing I hit a nerve and the humour went above you.
 
Last edited:
Top Bottom