cuso you have a 08 with 08 shocks? if so let us know how it works out. be hard to tell on the concrete in your floor but you never know, goal would be to pull over with 1 hand like the xm's
Here is the tMotion Bolted up to a 2009 146 skid. Everything seems to move freely, will post pictures tomorrow night of it bolted into the sled!
Its not a matter if it will work in pre 2010 sleds. It will fit and work.
But, it might not perform to the same degree as it would in a 2010-2012 sled.
That being said, I still feel the geometry of the 08/09's was better in deep snow. The changes to the 2010 center shock geometry for whatever reason you want to believe they were done, made the sled handle different.
Minor differences in geometry a 1/4" this way, or 3/8" that way make significant differences in how these sleds perform and handle.
The XM's did get up on top of the fresh snow better than the 2012's. Whether it is the difference in the durometer of the flex tracks, or the slight geometry changes associated with the T-motion they were better in deep fresh.
The ability to initiate off camber movements with less rider input is what I want to achieve with the kit. In pre-2010 sleds you will gain that. But you may see differences in how the sleds perform which could be possitive or negative. To the best of my knowledge no one has put an 08/09 on the snow with a t-motion kit.
It will be interesting. Its possible a t-motion in 08/09 sleds performs better in the deep than newer sleds. That would be funny
