summer e-tech mods

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
107,894
Reaction score
103,598
Location
Milo,Alberta
what clutching setup do you run on what lenght of track?

I ran 414 ramps, blue,bue TRA spring, weighted pins for altitude and a yellow Erlandson spring in the secondary. We ran 3 different setups and will be decide this summer what we thought was best for all snow conditions. I didn't do much spring riding this year so I don't have a final final what worked out best.:d
 

Deano670

Active VIP Member
Joined
Oct 10, 2007
Messages
1,905
Reaction score
831
Location
Beaumont
I am a retailer for SPI and yes there is a y pipe,pipe and can combo for the etec. Also a really nice clutch kit. Pm for pricing.

Deano

MAD MOTORSPORTS
 

EMANAARON

Active VIP Member
Joined
Nov 2, 2009
Messages
1,354
Reaction score
379
Location
Morinville,ab
from what i have read and seen most people havent done much if anything to theri etecs! Mine is completely stock, But its getting acouple goodies this season Extending to a 162 x3" Track on it. and thats it.
 

Deano670

Active VIP Member
Joined
Oct 10, 2007
Messages
1,905
Reaction score
831
Location
Beaumont
We will also be offering a big bore later this fall. As far as gains with the pipe goes your looking at 6 to 8 hp.
 

maierch

Active VIP Member
Joined
Oct 26, 2008
Messages
1,565
Reaction score
2,512
Location
Calgary
I am a retailer for SPI and yes there is a y pipe,pipe and can combo for the etec. Also a really nice clutch kit. Pm for pricing.

Deano

MAD MOTORSPORTS

The last I talked with Straightline they had pulled their y-pipe off the market because it kept causing engine codes. Have they rectified this?

I have ridden a 2011 etec with nothing but a SPI pipe on it (even stock can) and it really pulled hard. One of the reasons I have a 2012 coming this fall!
 

Deano670

Active VIP Member
Joined
Oct 10, 2007
Messages
1,905
Reaction score
831
Location
Beaumont
The last I talked with Straightline they had pulled their y-pipe off the market because it kept causing engine codes. Have they rectified this?

I have ridden a 2011 etec with nothing but a SPI pipe on it (even stock can) and it really pulled hard. One of the reasons I have a 2012 coming this fall!

Yes you are 100% correct. We did our testing and not only were the codes a small issue, but there really was not alot to be gained in the y pipe change itself or with the pipe combo. Bang for buck type of deal.
 

jbb

Active VIP Member
Joined
Aug 22, 2008
Messages
20,304
Reaction score
1,717
Location
k town
terra alps has one listed but no one to say it works or not good info so far keep it coming so far you guys saved me the price of a y-pipe

i think its going to be a new kit for this year.
 
Top Bottom