summer e-tech mods

[snopro]

I'll do that tomorrow. Did will get the clutching figured out? I know he was working on his own kit there.

We will have something for the fall. Just sorting out all the details right now.

 

[Flatlander_01]

what clutching setup do you run on what lenght of track?

 

[snopro]

what clutching setup do you run on what lenght of track?

I ran 414 ramps, blue,bue TRA spring, weighted pins for altitude and a yellow Erlandson spring in the secondary. We ran 3 different setups and will be decide this summer what we thought was best for all snow conditions. I didn't do much spring riding this year so I don't have a final final what worked out best.:d

 

[snopro]

Sorry. Ran a 163 track stock.

 

[Flatlander_01]

where do you do most your riding?

 

[snopro]

where do you do most your riding?

Mostly Revy last year and 2 trips to Fernie. How about you?

 

[Flatlander_01]

usually a few to valemount but mostly kakwa

 

[Deano670]

I am a retailer for SPI and yes there is a y pipe,pipe and can combo for the etec. Also a really nice clutch kit. Pm for pricing.

Deano

MAD MOTORSPORTS

 

[Flatlander_01]

I am a retailer for SPI and yes there is a y pipe,pipe and can combo for the etec. Also a really nice clutch kit. Pm for pricing.

Deano

MAD MOTORSPORTS

what kind of gains with the full exhaust?

 

[jbb]

Just looking for some advice on what works and what dosen't for overall performance.

Terra Alps Racing Inc.

there building 860 bb e-tecs

 

[EMANAARON]

from what i have read and seen most people havent done much if anything to theri etecs! Mine is completely stock, But its getting acouple goodies this season Extending to a 162 x3" Track on it. and thats it.

 

[Deano670]

We will also be offering a big bore later this fall. As far as gains with the pipe goes your looking at 6 to 8 hp.

 

[EMANAARON]

We will also be offering a big bore later this fall. As far as gains with the pipe goes your looking at 6 to 8 hp.

So there is actually a Big Bore working for these?

 

[maierch]

I am a retailer for SPI and yes there is a y pipe,pipe and can combo for the etec. Also a really nice clutch kit. Pm for pricing.

Deano

MAD MOTORSPORTS

The last I talked with Straightline they had pulled their y-pipe off the market because it kept causing engine codes. Have they rectified this?

I have ridden a 2011 etec with nothing but a SPI pipe on it (even stock can) and it really pulled hard. One of the reasons I have a 2012 coming this fall!

 

[Flatlander_01]

So there is actually a Big Bore working for these?

terra alps has one listed but no one to say it works or not good info so far keep it coming so far you guys saved me the price of a y-pipe

 

[Deano670]

The last I talked with Straightline they had pulled their y-pipe off the market because it kept causing engine codes. Have they rectified this?

I have ridden a 2011 etec with nothing but a SPI pipe on it (even stock can) and it really pulled hard. One of the reasons I have a 2012 coming this fall!

Yes you are 100% correct. We did our testing and not only were the codes a small issue, but there really was not alot to be gained in the y pipe change itself or with the pipe combo. Bang for buck type of deal.

 

[Deano670]

So there is actually a Big Bore working for these?

There will be yes, yes INDEED.

 

[Rucky]

Let Maxwell ride your sled next season; it will perform.

 

[jbb]

terra alps has one listed but no one to say it works or not good info so far keep it coming so far you guys saved me the price of a y-pipe

i think its going to be a new kit for this year.

 

[EMANAARON]

i think its going to be a new kit for this year.

Its been on there since early last season