So, long tracking my 154...

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
Going to a 165, keeping the same tunnel length..., have the rails and track, Thanks Caper.

Coating the rails to black , a couple of questions, mostly about snow flap:

Think I can just use removable flap, and just flipping it outwards? I was going to keep the mounting tab if it clears, Hope it's enough to get some throw.

Anyone have this done?

I noticed that the extension flap for the experts aren't available.. Are they?
 
Last edited:

Summit 934

Active VIP Member
Joined
Dec 26, 2014
Messages
679
Reaction score
4,524
Location
Pincher Creek
I just did the same to my 15XM went from 154-163. All I did was cut the flap to about 1/3 it’s original length, with scratchers down no issues.
 

GreyGhost

Active VIP Member
Joined
Jan 15, 2020
Messages
347
Reaction score
417
Location
Swift Current
I’m going to do something similar this summer. I was going to make my own “expert” flap and vacuum form it or make it out of carbon. The stock flap cut may still hit the track when its fully compressed
 

Summit 934

Active VIP Member
Joined
Dec 26, 2014
Messages
679
Reaction score
4,524
Location
Pincher Creek
2F29BDB9-3445-4427-9230-CA800B52049A.jpeg

This was how mine finished up, only used it once since the swap but I didn’t have any trouble with the flap.
 

Summit 934

Active VIP Member
Joined
Dec 26, 2014
Messages
679
Reaction score
4,524
Location
Pincher Creek
Tried to PM you the pic but can’t seem to get it to work, maybe someone else can help out with that??
 
Top Bottom