Silbers 850 turbo kit could be the answer..

[Caper11]

Yea. i know that. He called me to talk about it. I used stock clutches to, i never said they wouldn't work. I did however say that there is alot left on the table.

Oh ok, for some reason I thought you were running the p-85 and the team on your 850.

 

[turboetech]

Couple little glitches with the silber tho.... flash must change fuel curves down low my sled idles lower now and actually stalled a few times on startup and my altimeter is wacky rode 2000 meters this weekend and it showed 8000 meter yes meters not feet.... so yes updates are needed... but ran clean and pulled 7900 after some clutch tuning

 

[NM]

Mention a Visa card and Neil with Boost It chimes in....lol

Thats a real knee slapper. I don't recall you paying me anything...even though I spent hours on the phone with you after you bought a used sled with our kit. Man I miss this biz.

 

[mountainsledmania]

Oh ok, for some reason I thought you were running the p-85 and the team on your 850.

Yea thats correct... thats all i run now. However i did run the stocks stuff.

Couple little glitches with the silber tho.... flash must change fuel curves down low my sled idles lower now and actually stalled a few times on startup and my altimeter is wacky rode 2000 meters this weekend and it showed 8000 meter yes meters not feet.... so yes updates are needed... but ran clean and pulled 7900 after some clutch tuning

super glad to hear your enjoying it buddy

 

[turboetech]

Thats a real knee slapper. I don't recall you paying me anything...even though I spent hours on the phone with you after you bought a used sled with our kit. Man I miss this biz.

Your recollection of hours on the phone with me.... bud you told me to send you money for any info on a sled you built that I bought of a neighbor he gave you 10000 bucks to install and maintain the turbo and you had no time for me because I didn’t pay you anything so you want to chime in on silber turbo site with this bs.... go hide again no one has missed you

 

[turboetech]

Thanks to everyone on this site who has a passion to help fellow sledder and not just want to line their pockets when times are good.... and hide when not.... some really great info out there when you talk to the right people

 

[NM]

Your recollection of hours on the phone with me.... bud you told me to send you money for any info on a sled you built that I bought of a neighbor he gave you 10000 bucks to install and maintain the turbo and you had no time for me because I didn’t pay you anything so you want to chime in on silber turbo site with this bs.... go hide again no one has missed you

It was Dec 13 and 14 th 2017 you called. And it was numerous times. I was travelling to Ontario to pick up my new airplane. You had a check engine light that your Raves weren't closing. You cleaned the Raves once and it didn't really help so you took it to a couple dealers for diag but of course they couldn't help. I gave you some really good suggestions and even offered for you to bring it to my shop so we could help. We were t in business anymore, but hey why not help some dude out.
You ended up doing the rave mod from Mad Motorsports, which incidental turned out to be a massive fail. (I know 4 sleds the mod went in and it didn't work on any of them).
So you kept calling and calling and finally I said I would need some compensation if I was going to be your help line.
Thats when you bailed. You know just enough to be dangerous...so good luck.
BTW, this is not your thread, and I was just trying to help...its guys like you that makes me happy I'm not doing this anymore.

 

[turboetech]

Ya I remember it well.... I called and spoke to you twice and left messages on your phone which you never returned you where too busy for me You text me and and told me to send you my visa number for any info and recommended this rave delete at mad motor sports and never once offer to bring to your shop you told me you where out of business and not dealing anymore.... or in short you want money for your trade secrets I paid you nothing and got nothing other than a conversation of how great you are that your retired and flyin around in an airplane.... so ya your great my bad... Thank again to prob the 15 people I have talked with about making the silber clutching work.... talked to some really good people and few d&$# heads that like to stroke their own egos.....yeeehaaa SNOWMOBILING

 

[The Kickass One]

 

[turboetech]

I will definitely recommend the silber turbo to anyone...Justin and Cory return messages and their turbo is simple to install and very affordable and IMO put some panel vent on these turboed sleds

 

[fredw]

Well farming is put away for the season and broken ribs healed up.. So it's time to get this bitch installed and running.. Texted Justin, still nothing found on my ecm so I will not be sending another one away to him, but he says there is a programmer I understand he can send me to add tune and remove? Anyone try it out??

also sending me I think the ligher exhaust, he can have his heavy 1st gen slug back.. Is there any thing I need to know before tommorow install, hope to get it out this weekend as well.. I want this bitch running right out of the gate..

Happy to be back

 

[skegpro]

Well farming is put away for the season and broken ribs healed up.. So it's time to get this bitch installed and running.. Texted Justin, still nothing found on my ecm so I will not be sending another one away to him, but he says there is a programmer I understand he can send me to add tune and remove? Anyone try it out??

also sending me I think the ligher exhaust, he can have his heavy 1st gen slug back.. Is there any thing I need to know before tommorow install, hope to get it out this weekend as well.. I want this bitch running right out of the gate..

Happy to be back

You fall out of the combine?
How did you break your ribs?

 

[E-Zmoke]

Well farming is put away for the season and broken ribs healed up.. So it's time to get this bitch installed and running.. Texted Justin, still nothing found on my ecm so I will not be sending another one away to him, but he says there is a programmer I understand he can send me to add tune and remove? Anyone try it out??

also sending me I think the ligher exhaust, he can have his heavy 1st gen slug back.. Is there any thing I need to know before tommorow install, hope to get it out this weekend as well.. I want this bitch running right out of the gate..

Happy to be back

Farmer Freddy!! How you doing old pal? I am back as well, sounds like you are building a slobber kit!? Good choice, should work well. Is this on that same one that blew up last time you came out or did you get a new steed?

Yes they can send you a reflash to your phone and you can flash it your ECU from your phone...technology sure has changed over the years haha

 

[E-Zmoke]

You fall out of the combine?
How did you break your ribs?

I read in the newspaper he fell out of the combine broke 3 ribs and the tractor took off across the field crashing into the fence just past the black horse standing in the field. $8000 damage to the fence and tractor. The horse witnessed it and said alcohol and drugs were a factor as well as speed

Hope he is ok sounds like it was a bad one this time

 

[skegpro]

I read in the newspaper he fell out of the combine broke 3 ribs and the tractor took off across the field crashing into the fence just past the black horse standing in the field. $8000 damage to the fence and tractor. The horse witnessed it and said alcohol and drugs were a factor as well as speed

Hope he is ok sounds like it was a bad one this time

I heard he was donating some new DNA at the local colony and got bucked off.

 

[mt.sledder]

Fredw, check your pm and give me a call on Thursday morning.

 

[fredw]

Thanks for all the kind works.. Ya broke them twice last year, second time scared me a bit, fell into a hole in the fog the first time and flipped sled on me second time, needed more time to heal up.. No still using the blue skud from last season

Will shoot you a call later today, ^^ thanks

 

[mt.sledder]

Fred, nice meeting you the other day. Did you get that monster up and running after we got your ecu flashed?

 

[turboetech]

Second trip to the mountains and mine is dialed 7950rpm at 5 psi got 300 kms in 3 ft of pow unreal no bog stumble or turbo lag really pleased with silber simple and easy installation as well

 

[Caper11]

How is venom making out with his??? Have not heard anything from him.