Silbers 850 turbo kit could be the answer..

[mountainsledmania]

Why run the stock clutching on the silber?? I thought it came with clutching??? If it came with clutching whats wrong with what silber sent????

Or are you mentioning the clutches in general, and going to a p85.
Pfi572 has a p85 forsale all ready to go, and a paragon secondary.

all it comes with is pin weight for the primary and a secondary spring. its about a low end as you can get for clutching, its inadequate for the power it makes.

 

[venom]

all it comes with is pin weight for the primary and a secondary spring. its about a low end as you can get for clutching, its inadequate for the power it makes.

It also comes with a 43/47 helix

 

[venom]

Just browsed through BD install instructions. Looks like their kit only comes with a primary spring and new ramps with flyweights.

 

[Caper11]

Just browsed through BD install instructions. Looks like their kit only comes with a primary spring and new ramps with flyweights.

You are correct, that why I changed the clutching on the BD kit. I seen the setup and it sucked, what I put in turned out well. Pm me your cell and I’ll send you a vid of our test day, plus it would be good to have if you need assistance when your on your trip.

 

[venom]

Don't know how to post vids

 

[venom]

Posted a little vid on FB in the turbo owners group

 

[turboetech]

Picked up a set of Zollinger adjustable weights today for the old wobble p drive should be better than the silber set up but no seat time yet will post this weekend

 

[skegpro]

Don't know how to post vids//uploads.tapatalk-cdn.com/20181120/535497267a779dd252fc3fffb734df5f.jpg//uploads.tapatalk-cdn.com/20181120/c68b9e331cc354fb212f267b614e580e.jpg//uploads.tapatalk-cdn.com/20181120/ba9a7fcd54049e9b750fe3bba8fd4639.jpg

Where do you buy heat tape like that?

 

[venom]

Where do you buy heat tape like that?

Amazon. 24x12 sheet

 

[venom]

P85

 

[Rene G]

Nice cover!

 

[turboetech]

Well I will be like all the after market shops out there I got this silber kit dialed in and know the right setup.... l got mine running 125 % now just send Visa card number and I will tell you a setup that will blow your mind..... yes this silber kit works and works fine...

 

[mountainsledmania]

Well I will be like all the after market shops out there I got this silber kit dialed in and know the right setup.... l got mine running 125 % now just send Visa card number and I will tell you a setup that will blow your mind..... yes this silber kit works and works fine...

Told ya so.

 

[kanedog]

If the kits are truly pull and go or dialed, howcome there are new flashes/tunes every year? And how can new flashes be sold as tested when they come out early season?
Can you get more pull and go? Can you get more dialed? Or was the last tune garbage?
Not knocking any turbo kit but this has confused me for many years. I need the riddle solved.

 

[venom]

The automotive Industry is the same really. Manufacturers release updates and reflashes fairly frequently. Then theres the aftermarket guys. They'll tell ya their stuff is the best thing since sliced bread. A year and 10 revisions later its probably tolerable. Guess theres always room for improvement lol.

 

[Caper11]

The manufacturer has software revisions every year doesnt matter what product it is.

 

[Caper11]

Told ya so.

Hes using the stock clutches BTW.

 

[NM]

Stock clutches work fine. I sold about 25 850 kits and all have stock clutches. The higher boost guys need a bit different setup, but they are easy to clutch. Most other kits run too much finishing load in the primary and then fight with weight.
The stock helix works good in the secondary also. Just need a different spring.
We haven't blown a belt on our 850 in 2 seasons.
The secondary setup is the same as the XM and we sold well over a hundred of those.

 

[turboetech]

Mention a Visa card and Neil with Boost It chimes in....lol

 

[mountainsledmania]

Hes using the stock clutches BTW.

Yea. i know that. He called me to talk about it. I used stock clutches to, i never said they wouldn't work. I did however say that there is alot left on the table.