RedLine 2020 Expert Build

[Kibbels]

Dave & team are doing a great job always moving forward.

 

[oler1234]

lol love how the track is already missing chunks of paddles... its definitely building track speed.

 

[Caper11]

Lol in those conditions 10mph trackspeed could loose lugs.

 

[maierch]

lol love how the track is already missing chunks of paddles... its definitely building track speed.

That sled likely has 7 tooth drivers. You have to Notch the paddles to clear the tunnel. There isn't a good full side shot but it looks like the attack angle is shallower than a regular G4.

 

[kingcat162]

That sled likely has 7 tooth drivers. You have to Notch the paddles to clear the tunnel. There isn't a good full side shot but it looks like the attack angle is shallower than a regular G4.

They came with 6 tooth drivers?

 

[maierch]

They came with 6 tooth drivers?

You bet. All G4's come stock with 6 tooth drivers. For what it's worth 3.5" Pitch 6 tooth Drivers are the same outside diameter as 3.0" Pitch 7 tooth driver- ~6.6"

 

[Caper11]

You bet. All G4's come stock with 6 tooth drivers. For what it's worth 3.5" Pitch 6 tooth Drivers are the same outside diameter as 3.0" Pitch 7 tooth driver- ~6.6"

Thats a doo track in the pic. How much bigger is 7t 3.5” drivers in diameter? I can’t see the reason for going to that driver when the track has to be shaved.

Attack angle can be compensated with the adjustable limiter strap.

 

[skegpro]

Thats a doo track in the pic. How much bigger is 7t 3.5” drivers in diameter? I can’t see the reason for going to that driver when the track has to be shaved.

Attack angle can be compensated with the adjustable limiter strap.

Cause there is so much horse power with that kit it spins the stock drivers on the shaft.

 

[maierch]

Thats a doo track in the pic. How much bigger is 7t 3.5” drivers in diameter? I can’t see the reason for going to that driver when the track has to be shaved.

Attack angle can be compensated with the adjustable limiter strap.

Yup it's the stock track. Theoretically turning a track around a larger circumference SHOULD lead to less rolling resistance. I would think the owner sees 3 positives to changing the drivers- rolling resistance, Attack angle and taller gearing for the turbo application. Each to their own I guess.

7 Tooth 3.5" Pitch Drivers
7 x 3.5= 24.5" Circumference
24.5/ 3.14= 7.8" Diameter

 

[Caper11]

Cause there is so much horse power with that kit it spins the stock drivers on the shaft.

Whats that kit make for HP???

 

[skegpro]

Yup it's the stock track. Theoretically turning a track around a larger circumference SHOULD lead to less rolling resistance. I would think the owner sees 3 positives to changing the drivers- rolling resistance, Attack angle and taller gearing for the turbo application. Each to their own I guess.

7 Tooth 3.5" Pitch Drivers
7 x 3.5= 24.5" Circumference
24.5/ 3.14= 7.8" Diameter

I think its north of 250

 

[turboetech]

Closer to 300 hp it’s on a doo remember.... lol

 

[FastFarmer]

I think its north of 250

I’d suspect that to be the case with Dave...and reliable as all hell too.

 

[turboetech]

Bet you can burn eggs on the old p drive even at 250hp on a 2stroker

 

[oler1234]

That sled likely has 7 tooth drivers. You have to Notch the paddles to clear the tunnel. There isn't a good full side shot but it looks like the attack angle is shallower than a regular G4.

I suspect ypu are correct. I know there was some problems at the start with 6t drivers spinning on those tracks. 7t would definitely help the package and not run things crazy tights.

 

[Bnorth]

That's a sick sled. Hate the red/white experts.

 

[FastFarmer]

lol love how the track is already missing chunks of paddles... its definitely building track speed.

When you drop 30k on a sled I don’t think anyone cares about a $800 track...and you’re absolutely right it builds track speed

 

[kingcat162]

When you drop 30k on a sled I don’t think anyone cares about a $800 track...and you’re absolutely right it builds track speed

Is that all the track is new from doo? Every track I look at is at least $2000

 

[Caper11]

Is that all the track is new from doo? Every track I look at is at least $2000

Its about 2g for a doo track.

 

[kingcat162]

Its about 2g for a doo track.

I thought so - track speed is only good if your doing grass drags - a mountain sled needs to be setup like a tractor not a race sled - ground speed is what matters - track speed at 120km/hr is no good if your ground speed is 2km/hr - this is my beliefs