RAVE mod

[GYMBRAT]

Well then maybe you can engineer a way to say that to my face without getting your nose broke....

Now your sounding like me PB800 LOL atta boy

 

[fredw]

Did mine a few years back, in the garage one night, directions threw Brent.. Remove one spring and drill out a hole, took twenty minutes and the hardest part was putting spring back over diaphragmdiaphragm

 

[lilduke]

Did mine a few years back, in the garage one night, directions threw Brent.. Remove one spring and drill out a hole, took twenty minutes and the hardest part was putting spring back over diaphragmdiaphragm

Yeah now that I saw how its done, its a really simple mod.

 

[lilduke]

Now your sounding like me PB800 LOL atta boy

A friend of mine where's this shirt to the bar that says: I may not be a dentist, but I'll knock your fawkin teeth out...lol

 

[treeboy]

Anyone got pics of this mod and how to do it. Sounds like something I need.

 

[maierch]

Well then maybe you can engineer a way to say that to my face without getting your nose broke....

If it wasn't for those incompetent BRP Engineers you'd likely be riding the equivalent of a REV chassis with an old 670 crammed into it.

 

[pistonbroke800]

At least 670's had raves that work the way they are supposed to Chris

 

[fredw]

yes engineers I also feel should have to work on and replace every part they think up.. a little work experience in a shop like brents or ralphs could go along ways for brp

as for the rave mod, first mile out after having it done, it was noticeable to me, more mid range tq with better top end performance, and It just makes the sound of the sled different from the better air flow.... like the same advantage that the bored carbs did for the bb

 

[team-x]

You guys do know that not all engineers are overpaid, useless, and only sit in an office coming up with ways to annoy people right? They had to get around emissions somehow and rather than cut performance came up with E raves. Saying that might have to look into doing this to my sled

 

[deaner]

What are a set of these worth? I have a set of turbo als that I would sell as full bolt-on units if anyone is interested.

But it has to be worth my time to take them off. How much do you guys think I can get for them?

 

[tex78]

What's wrong with what al did Dean ??

sent while I should be drinking twisted teas

 

[deaner]

Nothing at all wrong. Im just putting the sled back to stock to sell it and I have a stock setup here I could put on the sled. So would either sell the stock setup or the modified one.

 

[adam8781]

Modifying RAVES for 800r conversion - MXZX Race Sleds - DOOTalk Forums

 

[oldford32]

What exactly is the spring change on the valve mod?