Post pics of your house build

[Crazy8]

I'm thinking 28 pot lights on the main. That includes master bedroom and ensuite.

 

[RETODD]

been quite awhile for me updating too...here are a couple!

Spray foam 3/4 done, tin work in motion, plumbing roughed in, roofing almost complete.

 

[RETODD]

 

[RETODD]

Industrial sized portable blast heater warming up non-insulated house to install spray foam insulation sucks back the gas :-( You can hear the heater in the back ground.

Check that baby spin...that is a 'half foot meter'

[YT]http://www.youtube.com/watch?v=1NMnkJpptWM[/YT]

Spray Foam installation:

[YT]http://www.youtube.com/watch?v=Lgrd1hSC3Mw[/YT]

[YT]http://www.youtube.com/watch?v=uMGcY4I7T-I[/YT]

 

[Uturn]

Looking good Retodd. Who's doing your foam?

 

[tasco]

Thought I would post some pics of my garage. We moved into our house almost 5 months ago. When I designed my garage I wanted a 2 car garage big enough so I can park a crew cab long box dually inside with enough room for a work bench and enough room to walk around the truck so here we go. As you can see its not clean, and I dont have a fancy exopxy floor but it's aprox 1000 square ft and I can load my truck and get my sleds ready where it is warm and out of the weather.

the gargae is constructed out of ICF like the rest of the house and the concrete is heated with hot water.

the Garage doors are 10' by 10'

 

[Uturn]

Siding, soffit and eavestrough done. March has been a slow month, hopefully get going again soon.

 

[higher n you]

Built a new shop in the fall. over head doors at both ends, 17' walls. first pics are raising and hauling away original shop. took 2 days build ourselves. going to add a 20' addition on this year.

 

[arff]

After a lot of thinking...This is what was done with the stairs.
The step was 10 inch's,tile guy cut it to 9 inch's..
Building code is 10 inch's

They removed top tile and placed a 10 inch stained hardwood step in it's place.

Stained the side strips and railings to match the upper railings..
Still touching up things in the house...

 

[Crazy8]

Metal work all done, scratch coat of stucco put on yesterday. Trim work almost finished inside, painters on site. Getting close now, finally.

 

[MATTIAC]

Very sweet ^^

Just started planning my next build with my architect. 7800 sq ft. Including 26x40 attached garage with full suspended slab. 1.5 story with walkout basement on 15 acres. Not sure when excavation will start. Just in the very early stages of planning.

 

[Uturn]

Metal work all done, scratch coat of stucco put on yesterday. Trim work almost finished inside, painters on site. Getting close now, finally.

Did you leave me in the dust over the winter. Looks great!!:d

 

[Crazy8]

Couple shots of inside

 

[Crazy8]

Did you leave me in the dust over the winter. Looks great!!:d

It's been a busy winter for sure, hoping to be in by the end of may. Garage floor and driveway getting prepped this weekend, will pour next week if the weather holds.

 

[Uturn]

It's been a busy winter for sure, hoping to be in by the end of may. Garage floor and driveway getting prepped this weekend, will pour next week if the weather holds.

Looks awesome, what kind of railing are you going with around your stairs?

 

[Crazy8]

Looks awesome, what kind of railing are you going with around your stairs?

So you don't like my 2x4 railings???

Going with a maple rail & shoe with iron spindals and 5" maple posts. Stairs are maple stringers with carpet treads, I find wood stairs too slippery and usually noisy.

 

[shan]

So you don't like my 2x4 railings???

Going with a maple rail & shoe with iron spindals and 5" maple posts. Stairs are maple stringers with carpet treads, I find wood stairs too slippery and usually noisy.

are you sneaking in late at night after a few wobbly pops? :d lol

 

[arff]

Starting to cleanup the back yard.

A picture of My house then one of Val's
She will kill me for this...:d

 

[sledderdoc]

Bwhahahahahahaha ............. :d:d:d

 

[green-horn]

Hey arff....why does the tin work look like hail damage. Why can't they make it thicker then cig tinfoil