Mike270412
Golden Boy
I need to find some pics of Oprah.
No snow, bored, Post a pic of your old mountain Mod!
- Thread starter catmando
- Start date
Photo dump.
96 ultra with triples,141” track
96 summit drop and rolled 141” track
My dads 03 rev with 156” Ralph’s porting
My 03 vertical escape with drop and rolled chaincase. 156x16 track, Ralph’s case porting, lite weight everything and 30 hp NOS.
09 m1000 Linderman porting 174x3
Waldy’s proto type 600 mountain max.
Posted a few of these before sorry for the repeat. Might find a few more oldies on the weekend.
Stg2Suby
Active VIP Member
Some old sledding photos from Revelstoke in 2003 with my MM700
More power
Member
Started with a 1997 MXZ 670 121”, finished with 670 Aerocharger turbo with cheater switch to 9lbs boost (approx 185hp) racer edge bulkhead which we dropped and rolled more to put the secondary shaft inside the tunnel ,9 tooth extravorts 163”x 2.25 camoplast track ,chrome moly front end ,Lexan hood. Weight around 417 lbs was a blast to drive .I really enjoyed building most of the sled myself (as we used to say “we hacksawed it together “
looking for a pre mid exhaust pipe for 670 so my son can take it out for a ride to see how it will do against my 22 850 turbo 175”
looking for a pre mid exhaust pipe for 670 so my son can take it out for a ride to see how it will do against my 22 850 turbo 175”
That’s a cool sled. Put a lot of km on a 98 summit X 136” Them old s chassis sure worked well back in their day. Any one ever have a racers X sled? I used to go on there website and drool over them when I was a kid.
Had a 98 summitX and a 98 SRX. The summit was definitely the better handling but the SRX was crazy fast.
Radar78
Active VIP Member
Suns out guns out boys!!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
tundra twin track
Active VIP Member
2008 Chatter Creek
tundra twin track
Active VIP Member
That was my last Mod,this Indy Lite from 2002 seen a lot of untouched terrain 364 lbs.Will dig deeper in archives to find pics of 93 Indy Lit & 1982 TX-C long track.Last pic Germania Creek,Valemoun.
tundra twin track
Active VIP Member
Entrance to the undoable drainage, 2 litres of water & 6 hours later it was doable.Wasp Creek,Valemount 2002
MP Kid
Active VIP Member
How wide is that track?
If in-fact it is two tracks, how did you drive them together….?
Dawizman
Active VIP Member
The start of my addiction
pano-dude
Active VIP Member
I remember your build thread on the twin tracker, still running it?
tundra twin track
Active VIP Member
It was 2 - 15” x174” with consecutive serial# from same batch that I cut down to 10” wide and tensioned togethe.The build is on here Custom Mountain Twin 174’s.
tundra twin track
Active VIP Member
I rode it for 4 years and bought a 13 XM with e start,old sled injures were showing up
MP Kid
Active VIP Member
Had a peek at your build thread, very nice
Most people would not appreciate the hours and “engineering” put in to a project like that. Interesting that you had the motor on the tunnel, the mass centralization, moto-style seating, and increased height must have helped the boon-docking ability, but definitely not the rip down the trail ditch banging ability. Definitely a purpose built unit.
Any video of this unit?
pano-dude
Active VIP Member
I hear ya, e start and reverse are essentials for me these days.I rode it for 4 years and bought a 13 XM with e start,old sled injures were showing up
Mountainman52
Active VIP Member
Got to love the Triple piped Triple..........
Not old. Recently built 91 650 141 1.75” Decker triples, heads cut 50 thou.
Fun sled
Sent from my iPhone using Tapatalk
neilsleder
Active VIP Member
Got to love the Triple piped Triple..........
Loved hearing those sleds in the mountains back in the day.
Similar threads
