M1000 uneven cylinder egts pcv

[rigrat]

Good day. I would like to lean out the mag side cylinder a little bit with my PCV. Anyone know if i can just use a PCV map(SLP) which shows separate cylinder 1 and cylinder 2. I would just lean out the cylinder 2 map by about 3%. Anyone have any experience running different maps between cylinders?? Thanks.

 

[BDF#900]

Was told thats why have to run a Boondocker to run twin pipes, because you cann't trim one side with PCV.

 

[rigrat]

I have built a map that uses separate maps for cylinder 1 and cylinder 2. Just want to make sure it is ok to try it.

 

[rigrat]

Found what i needed on POWERCOMMANDER site: ADVANCED MAPS
When the fuel map is advanced the PCV creates an individual table for each injector.
• Cylinder 1 table—PTO injector
• Cylinder 2 table—Mag. injector
Advanced maps can be used to increase the precision of fueling changes, but you may find a single map will be less complicated and sufficient for most engine modifications.