Lets see your enclosed

[Bernoff]

Great thread with lots of ideas to make the trailers more functional. Keep pics coming guys. Seems like lighting and heaters are important ones. Where are you putting the gas cans. Heated trailers ,hot enough to dry clothes I thought would be a bad mix.

 

[HoldMyBeerAndWatchThis]

TTT For this season.

 

[duck]

Just had this one delivered a couple weeks ago, $800 worth of superglides so far, cabinets next, hangers, etc.

 

[77Crash77]

28' wells. Added 50m of led strips. Exterior lights. Furnace. Super lamp hooks. New wheels and tires. No going back now.


Sent from my iPhone using Tapatalk

 

[kovs]

32' of strip lights and 3 RV led lamps
Couple alum boxes and work station, front cupboard.
I would just do more strip light next time 4 rows full length of trailer

Got a couple extra boxes I built 36" long 11.5" wide 9" deep at front. .125 alum material $140


Sent from my iPhone using Tapatalk

 

[snowseeker]

Here's a picture of my new 2016 triton. Just about finished the inside, but still have to mount the seats.

 

[the450kid]

whats the consensus on spraying the floors with Arma or Line x? Is everyone happy and not finding them slippery compared to what the factory's been putting down?

 

[BEL]

whats the consensus on spraying the floors with Arma or Line x? Is everyone happy and not finding them slippery compared to what the factory's been putting down?

Factory Duraguard on our ATC. No complaints or carbide marks/cuts so far, and no slippery than Line X.

 

[gibsons]

Sprayed our lat trailer floor with Line X. Worked great and held up really good as well. No issues with carbides cutting it up either.

whats the consensus on spraying the floors with Arma or Line x? Is everyone happy and not finding them slippery compared to what the factory's been putting down?

 

[Mike270412]

Sprayed our lat trailer floor with Line X. Worked great and held up really good as well. No issues with carbides cutting it up either.

Sticks to plywood ok?

 

[armascott]

Yes it sticks to plywood no problem, just make sure they put down a primer/sealer first.

 

[gibsons]

Yup, no problems at all. We pressure washed it first,(only because we waited 2 years after buying the trailer), let it dry good, then had it sprayed.

Sticks to plywood ok?

 

[gibsons]

We never put a primer or sealer down, and no issues the 3 years we had it.

Yes it sticks to plywood no problem, just make sure they put down a primer/sealer first.

 

[arff]

Sticks to plywood ok?

We have our enclosed sprayed , did the floor and 1 foot up the walls and the ramp.

 

[Mike270412]

Cool thanks. Had quite a few lip stands on door ramp. This would either prevent slippage or remove a lot more skin.

 

[posnick]

I have NUDU flooring in mine. Stands up well to skags and dosnt get slippery. I have no problem walking up the ramp.

 

[Summitric]

Where do you get nudu flooring? Any idea how much it is?

 

[Mike270412]

I think he meant nudo. Google never heard of nudu.

 

[bingo1010]

not sure where to buy it, but my look trailer has nudu flooring and i thought it was great since i wouldnt have to put superglides in it, turns out the carbides on the new sleds were cutting it so i installed superglides anyway. it does provide traction for walking for sure but is still slippery with a thin skiff of snow on it. the part i like the most though is the waterproof part, so hopefully it lasts longer. trailer is 3 years old now and still looks great

 

[GRD]

whats the consensus on spraying the floors with Arma or Line x? Is everyone happy and not finding them slippery compared to what the factory's been putting down?

Had our trailer sprayed with Line-X. Put superglides on as well (not shown in picture), works great and is holding up good.