Hard starting etec

clayton800

Member
Joined
Apr 4, 2010
Messages
10
Reaction score
0
Location
calgary
:c
onfused:BEEN OUT FOR THREE RIDES AND AFTER WORKING IT IN THE DEEPSNOW IT TAKES ABOUT 4 GOOD PULLS TO START IT AGAIN
ANYBODY ELSE HAVING THIS PROBLEM AND I DO NOT WANT TO
PUT IN E-START
 

steel town

Active VIP Member
Joined
Nov 24, 2009
Messages
650
Reaction score
103
Location
calgary
:c
onfused:BEEN OUT FOR THREE RIDES AND AFTER WORKING IT IN THE DEEPSNOW IT TAKES ABOUT 4 GOOD PULLS TO START IT AGAIN
ANYBODY ELSE HAVING THIS PROBLEM AND I DO NOT WANT TO
PUT IN E-START

mine starts first pull every time, unless its a wuss pull after digging for 30 min,the prototype I had last april did the same thing are yours is now though, take it to a BRP dealer and have them plug it in to BUDDS.(call first though) I'm not too booked up in service at my shop so.....
 

Hitchguy

Active member
Joined
Nov 6, 2007
Messages
141
Reaction score
13
Location
Leduc
I found with mine I have to crack the throttle ever so slightly and it starts first pull every time when hot. when sitting cold always one start not sure why but that's how it is.
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,583
Reaction score
18,773
Location
Edson,Alberta
:c
onfused:BEEN OUT FOR THREE RIDES AND AFTER WORKING IT IN THE DEEPSNOW IT TAKES ABOUT 4 GOOD PULLS TO START IT AGAIN
ANYBODY ELSE HAVING THIS PROBLEM AND I DO NOT WANT TO
PUT IN E-START

Take it o the dealer and get it checked out, The spark plugs are indexed and need to be installed and torqued properly and if they are not you'll experiance hard starting
 

HiLlClImB911

Active VIP Member
Joined
Nov 6, 2009
Messages
223
Reaction score
38
Location
Medicine Hat
the demo etec they had at corbin last year was hard starting, changed the plugs and first pull it went :eek:
 

underdog

Active VIP Member
Joined
Jan 11, 2010
Messages
21,563
Reaction score
7,174
Location
Carbon AB
Having the same problems with mine. Guess I should take it to the dealer.
 

Mac Daddy

Active member
Joined
Oct 14, 2010
Messages
36
Reaction score
4
Location
Medicine Hat
had the same problem with m8.give it a little throttle and went right away.Will check and change plugs to see if that helps.Hope the e-tec does not have same problem
 
Top Bottom