RMKRookie
Active member
would any one have a really good carb tuner that may have some experience on Yami Vmax carbs? I had it in at a NE dealer last spring and it ran worse after I got it back - dealer says all work done to spec.
carb work ?
- Thread starter RMKRookie
- Start date
FossY
Active VIP Member
what kinda carb work ??? just changing jets and needles ?
- Thread starter
- #3
RMKRookie
Active member
clean and make sure they are set up properly - had Walt Healy do this a couple of years back and needs it again
FossY
Active VIP Member
so u do have the stock or aftermarket needles and jets in ?
cleaning isnt that big of an issue if ure not affraid of taking them apart
when u do so lots of pics and a shop manual will tell u everything on how to do it
when u got it all disassambled bring it to a big printer company and they could ultrasonic wash all ure parts which makes them just like new
than u assamble everything again set it to stock settings and see how she runs if not running to good u can still synchronize them urself or let a shop do it for you
cleaning isnt that big of an issue if ure not affraid of taking them apart
when u do so lots of pics and a shop manual will tell u everything on how to do it
when u got it all disassambled bring it to a big printer company and they could ultrasonic wash all ure parts which makes them just like new
than u assamble everything again set it to stock settings and see how she runs if not running to good u can still synchronize them urself or let a shop do it for you
heavy d
Active VIP Member
Take any of your rice burnin' buisness to GW cycle on Barlow , just south of 16th
go to walt healy for rubber
go to walt healy for rubber
Similar threads
