we do? Here's last year at the end of May. https://www.snowandmud.com/forum/f14/no-bikinis-here-just-bumper-deep-50110.html
Back to polishing your willy....
Best tunnel polish
- Thread starter Bails
- Start date
we do? Here's last year at the end of May. https://www.snowandmud.com/forum/f14/no-bikinis-here-just-bumper-deep-50110.html
Back to polishing your willy....
Sprint5
Active VIP Member
- Joined
- Oct 30, 2011
- Messages
- 279
- Reaction score
- 122
Thats it! It cost me three times that to go back and fourth to the mountains!
Sprint5
Active VIP Member
- Joined
- Oct 30, 2011
- Messages
- 279
- Reaction score
- 122
polarisdragon800
Active VIP Member
Take the decals off if they're not needed. I took my "caution" stickers of my tunnel. I left the "155" stickers on and just tried my best to go around them. They did get a tad faded around the edges from getting a bit to close.
ferniesnow
I'm doo-ing it!
- Joined
- Dec 2, 2008
- Messages
- 112,063
- Reaction score
- 86,088
- Location
- beautiful, downtown Salmon Arm, BC
Very carefully by hand. I only have one decal on my sled (the small Canadian flag) as all the rest get torn and worn and look disgusting after a season. Doo not rub the decals with polish and remove any residual black stuff off before moving on as it will show.
I have 1 bottle remaining and I'm thinking with the new sleds being powder coated the need for the last bottle is no more. PM me for details.
PS for those reading and interested, this sled is for sale.
The Peterbilt (or is it Freightliner?) dealer on 114th Ave SE sells the F1 polish and a bunch of others that I have found work as well. The truck dealer is just east of Princess Auto off Barlow.
underdog
Active VIP Member
That one is the Pete dealer.
RMK Junky
Active VIP Member
- Joined
- Mar 15, 2009
- Messages
- 3,258
- Reaction score
- 1,044
- Location
- Grande Prairie AB.
- Website
- www.snowandmud.com
COOL! thx guys. I'll be near the Pete dealer today so will check it out.
As for the decals I have a few of them and want to try to keep them in place. Was thinking of covering them with painters tape or something to protect them.....
As for the decals I have a few of them and want to try to keep them in place. Was thinking of covering them with painters tape or something to protect them.....
HRT Offroad
Active VIP Member
I get my F1 at Peterbilt in Calgary as well...
ferniesnow
I'm doo-ing it!
- Joined
- Dec 2, 2008
- Messages
- 112,063
- Reaction score
- 86,088
- Location
- beautiful, downtown Salmon Arm, BC
COOL! thx guys. I'll be near the Pete dealer today so will check it out.
As for the decals I have a few of them and want to try to keep them in place. Was thinking of covering them with painters tape or something to protect them.....
My experience with tunnel polishing tells me I'd be more concerned with getting the yellow plastics dirty with the residue. The stuff is wicked in dulling and making things black.
My recommendation would be to take the plastics off and then you don't have a problem trying to clean them up.
Makes total sence!! I'll do that. It was going to be in the way anyway.
So I went to Peterbuilt and was looking at the F1. There were different grits so I asked the parts guy if you needed all the grits. He said dont buy F1 use "Wicked" metal polish it works better...... SOOOOO thats what I bought. They actually had three or four types as well as the clay bars and the bar polishing wheels.
I messed around for about 10 minutes with my drill and buff ball and this is what I ended up with... Not bad for ZERO effort. Going to see if I can borrow my neighbours buffing grinder(for lack of a better word) with cloth pads.
polarisdragon800
Active VIP Member
I find that the "PURPLE" metal polish by california customs (or something like that) metal polish works very well.
Chipping away at it. The polish is working well but having some hazing so I went and got some F1 coarse and medium. The coarse is really coarse and will scratch... but the medium seems to take them out. I am then doing it a third time with the Wicked. Only problem now is Where do you stop!!! LOL
(The tape over the decals worked great)
(The tape over the decals worked great)
polarisdragon800
Active VIP Member
Looks good!!! ^
ferniesnow
I'm doo-ing it!
- Joined
- Dec 2, 2008
- Messages
- 112,063
- Reaction score
- 86,088
- Location
- beautiful, downtown Salmon Arm, BC
Looks awesome. Some patience required with the tape job, eh!
Thanks guys.
Taping wasn’t too bad. I over taped the decal on all sides and took a brand new exacto blade and traced (cut) the decal out carefully.Probably did cut into the aluminum a tiny bit in places which will be noticeable if I ever remove the decals...... Guess I'll deal with that later if I ever need to.
This is the one time I'm regretting owning two sleds......
Then again will be twice the satisfaction when done.
Also I'm a firm believer that you don’t actually remove the tarnish off of the sled, you just move it to another location... Like your hands, arms and clothing. What a mess! LOL.
Edit... WD40 removes the black wax residue really easily if you get some on other parts of your sled.......
Taping wasn’t too bad. I over taped the decal on all sides and took a brand new exacto blade and traced (cut) the decal out carefully.Probably did cut into the aluminum a tiny bit in places which will be noticeable if I ever remove the decals...... Guess I'll deal with that later if I ever need to.
This is the one time I'm regretting owning two sleds......
Then again will be twice the satisfaction when done.Also I'm a firm believer that you don’t actually remove the tarnish off of the sled, you just move it to another location... Like your hands, arms and clothing.
What a mess! LOL.Edit... WD40 removes the black wax residue really easily if you get some on other parts of your sled.......
Last edited:
cooper
Active member
Looks real good now you can admire it allllll summer . sure makes them look good though hay.
Similar threads
