Any advice on buying used 2011 RZR?

[neilsleder]

So just replace brgs each time worn out add a little grease.

Seems too much work to grease old brgs

That's what I would use it for. Adding grease to new ones. There's fawk all for grease in them!

 

[arff]

That's what I would use it for. Adding grease to new ones. There's fawk all for grease in them!

Yes and hopefully they last an extra 500 km

 

[hdkawi]

You can buy ones you can grease with the axle in. That way just pull the axle nut off and slide the hub out and push that in. Then it pumps the grease through the crack from the inner races.

That seem like a better idea and easier for sure .
Any pics? Or link where to buy

 

[neilsleder]

That seem like a better idea and easier for sure .
Any pics? Or link where to buy

Pm Vance Matheson on here. He bought one off eBay for cheap. Or google Holly greaser. I know the holly greaser you can grease with axles in. But the one Vance bought is a single tool that does both axles.

 

[Jorg Jorgenson]

Well everyone, I wanted to say thanks again for the information as I ended up pulling the trigger on the RZR. Had it out for the Canada day long and it was a blast! Wanted to take it out for a weekend and see if there were any immediate red flags before I start getting too crazy with putting any money into it (other than a tank of fuel). Here's a couple pictures from July 1



even managed to get it stuck! And left it there overnight as it wouldn't start on me to get it out lol... when I bought it he told me that there is a little module/switch type connection that has 2 prongs on the frame kinda behind the drivers seat, if this gets wet or comes loose, the SXS won't start. After getting winched out of the mud, checked the connection, and sure enough it had popped off from all the mud. Something to watch for on your RZR if it won't start

 

[rzrgade]

Glad you are enjoying it !