also done gade snorkles

rknight111

Administrator
Administrator
Moderator
Joined
Sep 27, 2006
Messages
13,704
Reaction score
23,489
Location
Parkland County, AB and Valemount, BC
Website
www.snowandmud.com
Be shure to fill the one to the cvt full of water and it should not leak a drop. If it leaks at all then you may have a problem then run it for a sec then drain the cvt cover and ride. To see some good water footage see me in mountains and mud video by Tahoe films
 

bengp1

Active VIP Member
Joined
Apr 12, 2009
Messages
158
Reaction score
0
Location
grande prairie alberta
lol i thout u were just messin with my head with that but good call you were right i had one leak that i needa get a smaller hose clamp for then im good to go i owe ya a beer at the camp out this summer lol
 

DaveB

Active VIP Member
Joined
Sep 18, 2007
Messages
5,958
Reaction score
17,153
Location
Red Deer area
Nope. Now you get to reseal the CVT housing. What year of Gade? There was an updated inner housing for the 07 and older Outlanders as they tended to warp and leak.
 

bengp1

Active VIP Member
Joined
Apr 12, 2009
Messages
158
Reaction score
0
Location
grande prairie alberta
ok ron im confused i did my snorkles checked it for leaks filled it with water etc and fixed the two i found and my belt still got wet twice this weekend and im extremely confused it only happened when i was in water up to my seat though so ima have to figure it out
any ideas??
 

bengp1

Active VIP Member
Joined
Apr 12, 2009
Messages
158
Reaction score
0
Location
grande prairie alberta
so...i done pulled my cvt coer cause i was still leaking into my housing and found that the gasket wasnt installed properly and therefore it was leaking so into the shop for warranty work it goes as the quad was am otnh old and ive never pulled my cvt housing off in my life
 
Top Bottom