163" x 3" track on pro

[Kushniruk_16]

has anybody put a 163"x3" paddle on their 2013 pro? im looking to put one on without the middle windows. Will this work? if so what changes to driver/clutching would i have to do?

 

[E-Zmoke]

You will need 7T - 3" Pitch Avid Drivers and a 2205M Camoplast Track 162"x3"
You will also need to trim your rails and add a anti stab so you don't stab the track.

 

[Shanerd]

You will need 7T - 3" Pitch Avid Drivers and a 2205M Camoplast Track 162"x3"
You will also need to trim your rails and add a anti stab so you don't stab the track.

View attachment 142418View attachment 142419View attachment 142420

This my friend is a thing of beautie

 

[Kushniruk_16]

Im new to the 3 inch on a polaris...how do you trim your rails? and what is a anti stab?

 

[E-Zmoke]

You have to cut the tips of your rails or they will hit the external drivers. Remove the black caps and cut your rails just in front of the shaft that is holding your limiter strap. Just like in the 3rd pic. The anti stab is the wheels in the 3rd pic and these will ensure the track doesn't stab into the rails. Remove your old shaft and install the anti stab in its place.

 

[Chrisco]

Track and drivers in stock 1500 we do a ch!t ton of them.

 

[Chrisco]

You have to cut the tips of your rails or they will hit the external drivers. Remove the black caps and cut about half an inch or so infront of the shaft that is holding your limiter strap. Just like in the 3rd pic. The anti stab is the wheels in the 3rd pic and these will ensure the track doesn't stab into the rails. Remove your old shaft and install the anti stab in its place.

NO no about a 1 and a 1/4 off the tip just like the pic, after the antistab is on about 1/8 of rail should be sticking out.

 

[pfi572]

I would us the anti stab from Ice age that Chrisco has.They all work but the Ice Age are alot nicer. IMO

Im new to the 3 inch on a polaris...how do you trim your rails? and what is a anti stab?

 

[Dirty10]

will this work on the 12?

 

[CKrupnik]

Yes it will work you just need 7 tooth avid drivers,i would probably put an anti stab kit on and cut the rail tips back.

 

[CKrupnik]

yeah it will you just need a slight chaincase mod mountain magic has done them

 

[Teth-Air]

Does the stock motor and gearing have enough umf to turn that beast? or at least does it lose much track speed?

 

[Mikew5j]

Im new to the 3 inch on a polaris...how do you trim your rails? and what is a anti stab?

This thread may shed more light on installing an anti stab on a Pro.

https://www.snowandmud.com/forum/f450/anti-stab-kit-install-70251.html

 

[Tyson.H]

Yes it will work you just need 7 tooth avid drivers,i would probably put an anti stab kit on and cut the rail tips back.

Not this wont work on a 12 unless you machine your chaincase. With 7 tooth drivers the track wares through the case and you loose all your oil it is doable but not a simple bolt on. And yes you need an anti stab and cut rail tips

 

[turn&burn]

Is there any clutching required when putting the 3" on a 2013? I want to put the 3" on first ride for a weekend then do the slp stage 3 after.Thanks.

 

[Chrisco]

.

Is there any clutching required when putting the 3" on a 2013? I want to put the 3" on first ride for a weekend then do the slp stage 3 after.Thanks.

Yes there is.

 

[glassman]

What I did.

 

[clay923]

nice i like that idea better with the tips on, ive had anti stab come lose and lose wheels not once but twice and wreck tracks.