163 3 inch axys RMK with team tied secondary?

[jd8002011]

Anyone out there running a team tied secondary on an axys with a 3 inch 163? If so where did u start with a helix and spring?

 

[zeke]

I have a tied kicking around and was wondering the same thing. Did you put it on? If so how is it and whats in it?

 

[jd8002011]

Not enough snow to even ride around my house yet so it's sitting with zero miles. Was thinking about starting with a straight helix mid 50's and the stock spring maybe even one that's a bit stiffer on the top end but first trip planned in Jan gonna take it along and see what happens.

 

[davelaw1982]

I've been looking at this as well, this is what rec supply has listed for a 2015 163, with a 140-240 spring. I would think it should be close, for a 2.6, maybe a bit aggressive.


Sent from my iPhone using Tapatalk

 

[davelaw1982]

This was for 6-9000' as well


Sent from my iPhone using Tapatalk

 

[davelaw1982]

So i found a extremly lightly used clutch on Kijiji the other week for cheap, had the above mentioned spring and helix. Ran it in eagles pass on the weekend, great results. super excellent backshift, held rpm bang on, but was a bit low, running 8000-8100, stock primary clutching. This is consistant with a buddy, completly stock. This is all on a 2.6 163. I was holding 33 MPH all weekend track speed. Can anyone confirm their track speed with their stock unit as I forget what I was getting.
Thanks

 

[jd8002011]

Just got back from the mountains yesterday riding in waist deep powder , 8-10000 ft, 8-8100 rpm running 35 mph track speed.

Only have 100 miles on the sled 8 hrs on the engine was hoping it will rev out some or might adjust the clutching

will be be looking to try the tied this weekend coming up