Search results

Thanks... Ran a insert the first time.. broke below it in the tube.. lol... maybe if we chamfered it a bit better on the ends... Any aftermarket companies that sell these?

Got a buddy with a 99 mxz600 and he's running a 6 inch riser kit. Problem is the steering shaft can't handle the extra leverage, as it has broke a few times. Once above the pivot ( which was welded ) then it broke under the pivot a year later. Anybody have any info for a aftermarket steering...

Saw a sign in the Robb hotel the other day.. March 6th 2010 for the poker rally, staging east of Edson? Any other info anyone?

I had a 99 600 do the same thing.. The overflow from the oil reservoir goes into the crankcase where the water pump/oil pump gear contacts the crank, which lubricates it as well.. its a plastic gear.. and only lasts a little while without lube as it shears/melts the teeth off the gear. What...

If the old stove burns down his shed, he might sue!!

Got a older 70hp tractor with a blade.. have a nasty hill to plow up the driveway... I was curious if anyone has ever tried studs or lag screws in tractor tires and if so.... any comparison to tire chains? I pretty much am only gonna use the tractor in the winter, and the tires are about...

Me and a buddy put a 6 inch riser, and a pivot adaptor on a 99 mxz600..so 7 and a half inches... We had to put on a throttle extension, and a longer brake line, re route the hand/thumbwarmer lines, the kill switch... we got everything from royal in ontario for about 250 bucks... Buddy loved...

I knew someone that had a Alaskan Malmute and a Rotty - both females.. When the yote's got close to the yard, the Malmute would venture out to the field, while the Rotty stayed behind.. The Malmute would then play hurt, the yote's would come in, then all he!! broke loose.. apparently by the...

I have done the trip - its 120+km from Swan hills to Flatbush Cabin, then another 70km from Flatbush cabin to Athabasca, by following the trans canada trail both ways. Its signed pretty good from the athabasca river to athabasca, but west of the athabasca river it was kind of hard to see the...

No clutch plates???? Must be hard to stop when its running then.. having to always shut it off...... LOL... Babbitts Sports Center | Arctic Cat OEM Parts | Can-Am (Bombardier) OEM Parts | Honda OEM Parts | Kawasaki OEM Parts | Polaris OEM Parts | Sea-Doo OEM Parts | Ski-Doo OEM Parts | Suzuki...

I always heard synthetic oils were hard on clutch plates.. more slippage???

Leaky stator cover or grommet.... Poor CDI or coil connection. Kill switch shorting out... Spark plug cap wire connection not screwed in all the way..... it sounds electrical ??

I read all these quotes " if your not gonna eat it, then why kill it? " Out of all these ppl that post that - how many ppl fish? Catch and release in deep waters have a 70% mortality rate, and I am sure not 100% live that are caught in shallower waters.... AND.. ppl that wash their quads or...

Check out royaldistributing.com if you click on the part to put it in your cart - it gives you the bearing number,, IE 6202, 6402 etc etc.. then I go to the bearing store..

With dirt bikes - Never raced cracks me up... Instead it was rat bagged every weekend, the oil was never changed, that leaky fork seal went unfixed until last weekend, the valves were never lashed, and they ran regular gas all the time... Racers take the best care of their machines for the...

I would look into a aftermarket disc brake kit.. I put one on my 99 foreman 400 and they work great.. I got it from Royaldistributing.com ( high lifter is the manufacterer ) and it took about 4 hours to put in.. Cost was around 400 bucks, and it comes with calipers, rotors, and pads.. And...

Box canyon?? is that the cardinal falls headwaters trail??

I don't want these people on my property again... aside from showing them the faults.. All it would take is one to fall off a scaffold and turn around and sue me... then the shatshow begins.. I am just on damage control now, and hoping to remedy the situation myself... The small claims court...

I was getting a steel building put up. There was a manual, a phone/help line.. I had planned to do it myself, with the help of a friend, but I had a month long job come up in short notice, so I looked for outside help. I couldn't find anyone to do it for a quote.. SO I paid hourly, in Cash...

Anyone have any experience with lousy work done by contractors they hired to do work around their home/acerage/farm? I am in the middle of my first experience with this.. any input??