Search results

Anyone know where you can get a electric starter rebuild kit from. OEM or aftermarket, or a rebuild or aftermarket starter. The dealer wants to much. My bendix is not pushing out and engaging the starter. I tried to pull it apart and clean the starter but it is still not working.

Check your RAVE valves my 07 rev did the exzact same thing I though it was clutching! It was not, the RAVE Diaphram came apart easy fix put back together with a little locktight on the threads and as good as new back on clicker 1 with 8200 plus I may need to add some weight. That was of course...

Hey guys I was not able to open the snow west link I will try and reg there and see if it works. Is there anyway to figure out what # and symbol my friend needs. I belive he bought the engine of kijiji or something along those lines.

Okay I guess no one knows about swaping ECM/ECU programs. How about dose anyone know where a guy could get a used ECM/ECU or one from salvage. I have been trying all the local sled wreakers in and around PG and I have tried as far away as edmonton. Any places that I have been able to locate on...

My buddie has a 09 M8 engine and a 2007 M1 computer I think he means "ECM" he is trying to get this to work. Can he send his computer away and have it reflashed with the 09 M8 programing? If so dose anyone know any place that dose this? He has been looking for a used 09 M8 comp for a while...

Is there a certain track those "plates or balance weights" are to be in there are three choices right. The tree tracks the sliders slide in. I dont recal wich track they were in.

Can anyone tell me what this is for I had two of them in my clutch, they were in the track that the slides slide up and down in almost like a shim, so the governer cap did not sit down as far on that side. I looked on the parts list from Ski doo and its not in the parts list. I have a 04 shop...

Hey Pat thanks for the advice I know your sled pulls hard. I will give it a try. Dose anyone know what a stock weight is how much can these be adjusted? They are a threded type correct or are the a solid weight? The weights I have now are 16.6 grams. Also any ideas of why I would have the...

Well here's the update I went a rode on cut block yesterday no mountains:( and I found that I was not able to maintain rpm's with my clickers set on 6 I was only getting 7600rpm and I was getting alot of belt slip on my primary i turned down my rid height on my belt to 3 and much less belt slip...

I found the bushing on a parts list breakdown on a website it is piece #33 and I put it in the correct spot. There is not a clear direction of which direction the curve in the leavers is to face. But I am pretty sure it came out the way I put the in The weights I put in were new but they were...

I will recheck the clutch tonight after we get back from ridding but I am pretty sure I got the arms in correct the arms have a cerved in them and I put the curve so it curves up into the spider I put on a used spring cap but it looked the same as mine and did not bind on the fixed half shaft. I...

Well I got some 415 weights and they are much better than the 419 that I just tried they engaged at 3600 rpm pulled hard but only reached a rpm of 7600 with my clickers set on 4. So I through back in my 433 ramps and they engaged at 3500rpm and with a clicker setting of 2 I am reaching 8000 rpm...

sorry its a 07 rev 800r motor do they make a 419 with out that little ridge?

Okay I have got my primary back to a working situation. I ended up getting some used parts that are slightly diffrent, and it works but diffrent then I expected I ended up getting some used ramps that are a 419 ramp I had 433 anyway the 419 ramps have a little lip at the begining that acts as a...

Is my old clutch a TRA7? can you tell from the pics? I did not find any splines

Thanks finndo for the info I may have found a clutch there is a fella in cranbrook B.C that has a TRA3 he said for $350. He daid it was in good shape that they took it apart and cleaned it all and it looked good, he said I would need to change the ramps for what my sled came with to get optimal...

Here are a few pics of the damage.

Hey Guys thanks for the info etc. I may be cheaper to find a used clutch the outer side of the clutch were the belt rides has a area that looks like it has a crack in it, the ramps, sliders, the slieve governer cap has some scuffs rollers, I will take some pics and try to up load them. I am not...

Well the luck is continuing on I pulled apart the primary as well to clean it up and found the roller ramps and outer spring conatinment to be wore out and broken:rant::(:( any one have any of this for sale? I might be better off to part this thing out:rant::realmad: since the begining of the...