Search results

you can use 06 head on 07

the problem with the 07 it doesn't have a themostat so it has to heat the whole system

my 05 did that just before it blew up

fuel pump under the engine is known to do that

I had one that did like that it was the temp sensor try and unhook and run the sled and see what it does

if it's an ho motor it shouldn't have the seal between the 2 bearings on the pto side that was only 2001 and 2 after 2002 no seal between bearings is it possible you can take a picture of the cylinders on the outside intake then we can see if the cylinders are ho or not

all cranks from cv-tech has japanese bearings now they used to be sh.. bearings

ytx 2o lbs is the part number for the battery yuasa is $ 125 and powerpack is $ 85

check in front of ecm if it's oily and on top of the mag cover if it's oily in those spots the oiltank is overfull if you loose the lid then no more will run out

when you look at the video you can see the bolts were tightened on the backside of handlebar they are supposed to be on the front of the bar

on the video it shows the bolts on the back side of bar it should be on the front

Iam in bowness and I will sell or trade with your ringgear u can phone me between 9 am and 6 pm 403-247-7029

I will trade you if you got 1 for rev ho

they do not have to hook up the computer only the harness and a battery and all lights will come on and the gauge package

if it's a rev you need a different harness over the clutches

if you took electric start off you need a different harness on top of the clutches otherwise it won't run

sometimes it's the relay right on top of the clutches

I got a wiring harness i plug into diagnostic plug and it will activate all electrics included gauge or you can go to a dealer and they can do the same thing

try and turn engine 1 way and the other way look at piston it looks like a bad rod to me

make sure you don't have carb heater on