Zillas 30x11x14 all around

Brute Force Boy

Active VIP Member
Joined
May 17, 2007
Messages
703
Reaction score
74
Location
Peace River, AB. Canada
I'm thinking of running Zilla 30x11x14 front and back on my 2011 Polaris 850xp touring. Looking for more floatation in the skeg.
I'm putting a 3" highlifter lift on it this week so I don't think clearance should be an issue.

Anyone running this? how's it work?

Thanks
 

recguy

Active VIP Member
Joined
May 17, 2008
Messages
488
Reaction score
190
Location
Cold Lake, Ab
I'm running 28" 11 in back 9 in front. Works well lots of room. How much for the lift?
 

Brute Force Boy

Active VIP Member
Joined
May 17, 2007
Messages
703
Reaction score
74
Location
Peace River, AB. Canada
I'm running 28" 11 in back 9 in front. Works well lots of room. How much for the lift?
I got it through my dealer, the lift was $440 and the longer front axels were $140 less a 10% discount I get through them. I went with the Highlifter kit as they were one of few that kept the sway bar mounts.
 

OnlyPolaris

Active VIP Member
Joined
Apr 28, 2008
Messages
1,964
Reaction score
520
Location
Lloydminster, AB
If you plan on using stock wheels you will probably need spacers. The tires will most likely rub on the floorboard mount in the rear.
 

cementfist27

Active member
Joined
Dec 16, 2011
Messages
110
Reaction score
117
Location
Beaumont, AB
I don't have the Touring model, but I do have the regular 2011 850 XP EPS. I am able to run 30" Zillas all around (9" in the front, and 11" in the rear) with no spacers or lift. I am not 100% sure if these two models are set-up the same way, but I think it's safe to assume you will be fine. I run the softest shock setting and my pudgy ass is 265 lbs. You will get a slight rub on the front if you ride aggressively on a rough trail. Hope this helps!
 

rzrgade

Active VIP Member
Joined
Sep 22, 2008
Messages
7,580
Reaction score
14,760
Location
West of Toronto
Yes i run this setup with an rubberdown lft. Works awesome. I did a little trimming on my floor boards ,not much though. 30/11Zilla combo with a lift makes the 850 tough to beat in the mud & trails all around........
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
58,307
Reaction score
51,699
Location
alberta from the back porch
Yes i run this setup with an rubberdown lft. Works awesome. I did a little trimming on my floor boards ,not much though. 30/11Zilla combo with a lift makes the 850 tough to beat in the mud & trails all around........


hehe now that right there is funny nev. you got that old beater polaris runnin pretty good alright. hehe
 

recguy

Active VIP Member
Joined
May 17, 2008
Messages
488
Reaction score
190
Location
Cold Lake, Ab
Yes i run this setup with an rubberdown lft. Works awesome. I did a little trimming on my floor boards ,not much though. 30/11Zilla combo with a lift makes the 850 tough to beat in the mud & trails all around........

How much will you charge me to do a rad relocate and snorkles like your 850?
 
Top Bottom